| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
Fuel transfer/polishing pump
Subject: Fuel transfer/polishing pump
From: Jere Lull I figure a new 30-micron filter will have one third (or 1/9th?) the resistance, switching up to a 900 would only (about) halve it. I would guess much less than that. Based on the surface area of a 900. You're right, that wasn't entirely clear. We change the filters each spring as cheap insurance. Got it. :-) Capt. Bill |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem changing out my fuel pump | General | |||
| Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
| Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
| Inboard won't run above 2800 RPM | General | |||
| Fuel pump to carbs fuel line replacement | General | |||
Hybrid Mode
