Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Fuel transfer/polishing pump
Makes sense, but there is quite alot of evidence out there that
a polishing system is a good thing to have. I can't really increase the size of my on-engine filter. I could increase the size of the Raycor, but at the pore sizes I run (30 micron) in it make it necessary to change the on-engine filter regularly as well. Bigger Raycor won't fix the problem. Doug "LaBomba182" wrote in message ... Subject: Fuel transfer/polishing pump From: "Doug Dotson" Unfortunately that fuel clogs up the filters. That is the entire problem. Having clean fuel in the engine fuel system avoids the problem. Just go up a size or two in your filters. The surface area difference between a 500 Racor and a 900 Racor is tremendous. Many times on a boat with filter clogging problems, I have just installed a larger filter system and the time between changes has gone back to normal with no more clogging in heavy seas problems. Capt. Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problem changing out my fuel pump | General | |||
Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
Inboard won't run above 2800 RPM | General | |||
Fuel pump to carbs fuel line replacement | General |