| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
Fuel transfer/polishing pump
Subject: Fuel transfer/polishing pump
From: "Doug Dotson" Because small filters ahead of the lift pump stress the pump and cause premature failure. No fun. Not if you run a large enough (as in surface area) filter and change it regularly. At 1 - 5 gph through a Racor 900 I don't see how you could over stress a well built lift pump. Capt. Bill |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem changing out my fuel pump | General | |||
| Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
| Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
| Inboard won't run above 2800 RPM | General | |||
| Fuel pump to carbs fuel line replacement | General | |||
Hybrid Mode
