Home |
Search |
Today's Posts |
#32
|
|||
|
|||
Fuel transfer/polishing pump
I don't think mine is a well built marine fuel tank. But is what I have.
I'll know more when I open it up this winter an peer inside. Doug "LaBomba182" wrote in message ... Subject: Fuel transfer/polishing pump From: "Len Krauss" As for stirring up the crud, one guy told me he shoots a jet of air around the bottom of his tanks. Has a small L-shaped copper tube on an air hose, and with it tied to a dowel/rod pushes it to bottom and "aims" it around. He'll them sometimes just let the thing bubble away while polishing to help keep particulate matter in suspension. But he is only stirring up one baffeled area in the tank unless he has access plates to each area. No offense, but how many of you have actually seen the insides of a well built marine fuel tank? Capt. Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problem changing out my fuel pump | General | |||
Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
Inboard won't run above 2800 RPM | General | |||
Fuel pump to carbs fuel line replacement | General |