Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #31   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 1,840
Default Link Titanic disaster


"wizofwas" schreef in bericht
...

I don't know if there is an English word for, I could not find it but
send
you a small picture, we call then "popnagels" and use them wit a
popnageltang (see other pic), do you know them in America?
We are not allowed to use them anymore to fix damage on a car.


They're called Pop Rivets here in the US of A. And as to fixing
the sheet metal on a car, they are only used by "backyard mechanics"
to do quick repairs so they can sell the car fast.


Thanks, In the Netherlands its forbidden to use them in cars.
If you buy a car with pop rivets even if you didn't know, you have to fix it
proprly or you lose your car if the police checks your car..

And Bouler, your English is just fine. I just wish mine was half as good
and English is my first and only language.

Thanks for the compliment wizofwas (special nick;-)
--
Greetings
Bouler (The Netherlands)




  #32   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 36
Default NL - Friesland _ Prinsenhof _ tacking a skutsje - file 4 of 5 DSC_8043_bewerkt.jpg


"HEMI - Powered" wrote in message
...
Bouler added these comments in the current discussion du jour ...

There are really two parts of the Titanic disaster/tragedy still
being investigated: the causes related to Capt. Smith's decision to
(apparently) ignore warnings from other vessels and modern
information just now coming to light as to structural weaknesses in
the hull of the ship itself. For the latter, one can point to the
design standards for metalurgy and riveting of the day as well as
theories still being investigated as to whether a gash was actually
ripped open on the starboard side or just many plates that buckled.
Also, new information suggests that the bottom of the hull fatally
scraped along an outcropping the the ice berg which ruptured the
hill longitudinally for some distance. Both are virtually
impossible to prove or disprove even with several successful dives
on the wreakage site because the hull sits in a position where it
is impossible to determine a root cause and reluctance to bring up
any more steel makes it difficult to do more extensive metalurgy
studies. For the former, one can read the eye witness accounts of
the sinking from survivors and see gross inconsistencies, such as
whether the hull did or did not break in half before the ship went
down (it is now clearly known that it did crack in half as the bow
and stern sections of the wreakage are a couple of miles apart).


You're very well informed.


Thank you, I try. This stuff does interest me, although I do have to
admit many areas where my technical expertise is severly lacking. I
know I burned DVDs from some History Channel episodes maybe a year or
so ago. If I get ambitious enough, I'll try to find them but I have
made a mental note to re-record them again on my DVR. It's a dumb
coincidence that a rather long episode or two aired just last week, I
think, relating the story of Titanic's construction, it's major
structural and safety weaknesses, details of the sinking itself, and
results of the most recent dives on the wreak, which I think began in
2002 and maybe ended a year or two later (but I'm rather hazy about
that, please help me out if you can).


If it's the episode I'm thinking of where they found a 60 Foot(?) section
of the keel that was separated from the rest of the two pieces of the
ship. This section of the keel was from the middle of the ship, and it
broke
away from the stresses that was placed on it, thus allowing the Titanic
to break into the two pieces and sink much faster than it normally
would have. It's been a while since I've seen that episode, but
that's what I remember from it.

wizofwas


  #33   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default Link Titanic disaster

Bouler added these comments in the current discussion du jour ...

Here you can read what I wrote.
http://www.abajournal.com/news/titan...ad_rivets_book
_s ay s/

A little logic here, you have to know not every link is complete
and sometimes broken.
Because the link was to large the last symbol is on the next rule.
Try again with on the end "says/".
You could have known Jerry grin


I'll try again but I thought my URL was OK. But, as to your writing
it vs. reading it, let me respectfully refer you to your exact
words, in English, of course, right under your [snip] - "here you
can read what I WROTE". Did I misunderstand/misconstrue your intent
here?


My mistake, I must have had a black out and thought wrote was the
past tense of read (sorry sir;-)


I had similar problems when trying to learn written French in college.
In English, the past-tense of "read" (reed) is also "read" but is
pronounced "redd".

OK, I tried it again, I THINK the way you suggested, to wit:

http://www.abajournal.com/news/titan..._rivets_book_s
ays /

I have Xnews line width set right now so that the only character
that wrapped is the slash. If I still have it wrong, please hold my
hand, you know what an Internet newbie I am!


I clicked on the link and it brought me were I had to be.
See screenshot.


That is precisely what I see, Bouler. The reason I kept coming back at
you is that I was incorrectly looking for a note where your critique of
the book could be found until I found out that you had only READ the
report here but had not WRITTEN a critique. My apologies for
misconstruing your intent.

This is actually quite old news. I can't cite the date it was first
proferred as a theory of the sinking but it must go back at least 10
years. I didn't read this review nor the book but I've read enough
about investigations of other sinkings where the wreak could be
examined more easily and watched enough shows about the Titanic over
the years to understand the issue.

Without going off in the tall weeds on lots of techie stuff,
mathematicians and statisticians describe it two ways that may be
useful in understanding where the rivet failure theory fits into the
entire Titanic investigation. First is the principle that some types of
data or testing are termed NECESSARY but NOT SUFFICIENT, meaning it may
be necessary to test for failed rivets to explain the Titanic sinking
but it is not sufficient on its own and one must look further for a
complete and proveable explanation.

Second is the principle of determining "root cause". ALL problems,
failures, anything that goes bad may have one or more causes, perhaps
dozens, or even thousands of causes, but there is only ONE so-called
root cause. Some equate this with "most important cause" but that is
inaccurate. Perhaps the best example I can cite is the 1985 space
shuttle disaster where it blew up 85 seconds into launch. Some hundreds
of causes were found and resulting in nearly 1,000 engineering changes
to the shuttle and its booster rockets. But, the ROOT CAUSE turned out
to be O-rings on the fuel tanks that failed and allowed leakage during
a cold-weather launch. This is the first launch of a space vehicle in
below-freezing weather at Cape Kennedy in Florida. Continuing just a
bit, the cold weather itself was also a cause of the disaster, of
course, yet it couldn't have caused it solely but ONLY because the O-
rings failed. In the theory of statistics, specific failure mode
analysis (sorry for the jargon but it is necessary to be precise and
accurate here, please just accept it, OK?) one strives to identify ALL
the modes of failure then use deductinve reasoning based on the facts
found and inductive reasoning based on facts NOT found to arrive at a
conclusion as to the most likely root causes in descending order of
importants and probability of likelihood. Then, using the probability
and statistics methods of positive, negative, and null hypothesis
testing, one attempt to isolate the ONE cause which MUST be fixed in
order to prevent a future failure.

Again, my apologies for the jargon and for the pretty deep math stuff
but again, please just go along for a bit more. One can remove causes
1, 2, 999 and STILL experience more failures if the removed, i.e.,
fixed, causes do not include the so-called root cause. Now, the
unfortunate bad side to failure mode analysis goes back to "necessary
but not sufficient". It is NECESSARY but sadly NOT SUFFICIENT to remove
the root cause if enough OTHER causes remain. Back to Titanic, failed
rivets may or may not be the root cause but clearly are A cause of the
tragic sinking. AFAIK, NO root cause has been developed and the latest
theory I am aware of, besides the hull plate metalurgy things I already
talking about, inadequate watertight bulkheads discussed by another
poster, and many other things, suggests that perhaps a secondary or
even the primary cause of the accident may have been bottom hull
scraping along an out-cropping of the berg, noted in other sinkings by
icebergs through history. Again, unfortunately the Titanic bow section
lies at an orientation that does not permit easy examination of its
bottom.

And, so the quest for as many causes of the sinking as possible goes
on. It might be easier if two things were true that are not: 1) the
wreak was in much shallower water and 2) international law and the
desire of all to respect the memories of the dead now prohibit
destructive testing or the bringing up of large pieces of the wreak
even if put back to rest on the ocean floor at a later time.

Bouler, I looked here but cannot find a reference to you
specifically. Could you please provide a closer link into the
American Bar Association web site where you wrote an article on
the rivets of the Titanic?

I did not write it, I read it, I'm a teacher, not a technichen.;-)


Please see my comment on this above and help me understand where I
went wrong.


I did, and and you were right and I meant read in stead of wrote,
humble apollogies.;-)


Cool your jets, Bouler, it is much my mistake as yours. I was aware of
your 3 languages and I am quietly aware of mistakes in spelling,
punctuation, grammar, and usage that you make that are quite similar to
most people who use English as a 2nd or 3rd language. I don't point
them out to you either in public or even in private because it is
inherently insulting. Rather, if I can, I simply figure out what is
correct and more on or perhaps ask question.

Specific to my mistake on this one, though, my intentions were MOST
honorable because my intent was to HONOR you for what I perceived as an
important contribution to the collective pool of knowledge about the
Titanic sinking. Sorry that I already knew about the rivet theory but I
was about to flood you with complements for superior knowledge of the
sinking based on careful research that enabled the ABA to quote you
directly. So, again, please accept my apologies for both
misunderstanding you and for snowing you under in what must've looked
to you like I was trying to refute your expert testimony. You are far
more the nautical expert then me, I just have a few - very few! -
tricks up my old-time engineer's sleeve when it comes to understanding
the science behind the sinking's many theories. But, you can trust and
I thank you for the fact that I now have a Favorite in IE6 pointing to
the ABA article.

Yes, Bouler, I'm aware that you're gifted with two more languages
than I am, save a dozen words I might be able to cobble together in
Polish or German.


You forget German and French, but not so good as the other three;-)


In my case, my mother was Polish written and spoken bi-lingual and I
picked up a few words here and there because we went to Massachusetts
every year when my father was laid off at the Plymouth Plant and heard
lots of Polish spoken at family gatherings. And, in my stay in West
Germany in the Army circa 1971, I picked up enough to order a good meal
anywhere - "eine wiener schnizel mit pomme frits und salade, und eine
bier, bitte, snell!". grin

And, yes, rivets were used in cars, as recently as in the 2002
Chrysler Prowler I owned a few years ago. The BIG difference was
that car rivets are relatively small and generally are simple
attachment devices with similar strength to a sheet metal screw.
They're typically inserted with a ribbon of rivets along a tape in
something like an ammo belt for a machine gun, with the rivet gun
itself being either a manual tool one squeezes to get the force or
an air tool, as used in early car applications.


I don't know if there is an English word for, I could not find it
but send you a small picture, we call then "popnagels" and use them
wit a popnageltang (see other pic), do you know them in America?
We are not allowed to use them anymore to fix damage on a car.


These are exactly what I was referring to that I believe are still in
use in cars today. We call these "pop rivets", perhaps the English
translation of "popnagels", I don't know that.

But, NOT red-hot rather large rivets as were used until even the
post- WWII years in sky-scaper steel girder construction and are
still used in bridges, much as ships used them. It is the brittle
metalurgy of the hot rivets as used on ships like Titanic which are
alleged to have failed causing the sinking. I say "alleged" because
it CAN be shown with some difficulty that SOME rivets are
defective. It is difficult because they are severely
corroded/rusted after some 80+ years in salt water. I also use the
term "alleged" because I don't personally know of any nautical
structural engineers or marine archeologists working with engineers
that can positiviely point to the rivets, again unfortunately
because that part of the hull is laying on its starboard side
covering up the "problem."


There are so many sorts of rivets, from small to large, maybe you
can find a picture on Google. Ships is my hobby, but I never worked

with ships like you did with cars.

Bouler, I am neither a car mechanic nor a car designer, I had a
relatively minor role early in my career in the development of front
and rear car SEATS. But, through my long career as I changed from pure
engineering into a variety of jobs related to computers and CAD, I
began to get to know more and more people from technicians and
mechanics to designers and draftsmen, engineers, supervisors, managers,
chief engineers, all the way up the vice presidents within Engineering
and Manufacturing. That's not bragging, it was just necessary for me to
know these people in order to do MY job of supporting their job by
providing CAD training and support and OA (Office Automation) support
to their people. Naturally, the more I could glean about the product
development process, the better I was able to do this.

That said, the car biz is VERY complex, and my knowledge is much more
complete - such that it is at all - on the sheet metal body, soft and
hard trim, and other aspects of the body of the car than it is for the
electrical systems, and my knowledges drops off very fast for engine
and transmission design, and for suspensions and brakes.

One of the many things I had to learn fast the hard way when I first
took my job at Chrysler was the difference between an education in the
basic mathematics, physics and chemistry underlying the science of
engineering from its practical application to the design, development,
testing, and manufacturing of actual parts and systems. There is a big,
BIG difference I found out quite painfully between engineering
education and practical engineering training and experience. So, just
as I can hardly do the complex math I once could, I can also no longer
talk with any certainty about what I'd learned over 3 decades about how
cars are put together. But, just as it is said that one never forgets
how to ride a bicycle, I still remember just enough to be dangerous.
grin

Perhaps in your case, your love of ships that is your hobby has enabled
you to take a pragmatic approach to learning about things nautical in
the same way that my interest in cars from my very early childhood was
pole-vaulted into an engineering degree and then with a LOT of time and
effort, a successful career. This effort for me has borne great fruit
in my current hobby of collecting car picture maybe the same as what I
am sure has been an equally great investment in learning about all
kinds of boats and ships has aided you in your hobby. Also, where you
live and where I live go a long way to why we know what we know and
don't know what we don't know, agree at all?

One last comment on rivets in cars. I think you're correct that no
one uses them for structural purposes anymore, probably not for a
long time. But, I THINK they can still be found in non-structural
applications such as attaching plastic trim on the interior or
exterior of the car where there's little stress and loading except
to keep the thing in place.


I think thats allowed, but not to fix severe damage on the outside.


What is much more common today are structural adhesives which allow
very fast assembly with no fasteners at all but with all of the
strength of a traditional fastener such as a screw or pop rivet.
Another fastener in common use today is the so-called single use
plastic push fastener. One type of these are called "Christmas tree
fasteners" because the little pieces of plastic has small ribs that
make them look like a Xmas tree. They are inserted from the back side
of a trim panel of some sort and pushed into a pre-stamped hole in the
inside sheet metal. They only go in once and are destroyed by the
removal process if a repair is need, so new fasteners must be used.

The American use of visible chrome-plated sheet metal screws with a
Phillips head went on for decades until the Japanes automakers such as
Honda and Toyota taught us quite painfully in the 1980s that interior
and exterior trim could be attached more firmly yet with a much better
look, fit, and finish with NO visible fasenters, hence the rapid rise
of adhesives and the one-time fasteners. Today, a visible screw or
rivet is almost impossible to find and manufacturers pride themselves
oon the good looks of even things like the engine compartment where
everything is hidden vs. the olden days where there were tubes, pipes,
hoses, clamps, wiring harnesses, all sorts of ugly stuff snaking it's
way around to support the powertrain.

Indeed Jerry a lot of theories.
Normally the rudder goes left if the ship must go to starboard.
I do'nt know how this is on big ships, because with a steering
wheel its technically simply to change the direction.


Huh? If the rudder turn to port, i.e., left when looking down on it
from above, would the water not force the stern to starboard and
thus the bow to port, the intended direction? What I was talking
about was the British convention which literally meant turn the
RUDDER to the opposite direction from the turn command from the
bridge.


I said its technically possibel, I have a drill that can fo forward
and backword, so why not a steering wheel.
Of course this is pure hypotetic, but it must be possible.


You mean "hypothetical" here, I assume? Yes, it is possible, but one
would have to get the water to flow over the rudder in a different way
than is traditional for a rudder steering system. One way might be the
growing use of water jets in patrol boats, pleasure craft, even larger
warships that squirt a high-pressure high volume stream of water out to
both propel and steer the craft. Obviously here, the force of the water
squirting to starboard would move the stern to port and the bow to
starboard.

Now, if you really mean that a rudder or water jet steering/propulsion
system can actually move physically to starboard and the BOW moves to
port, please describe it to me, as I'm not familiar with that I don't
think. Your analogy of a reversible drill motor is a good one and it's
application to a boat or ship is that which one major theory of the
Titanic sinking is based on. Namely, that it MIGHT have been more
effective in preventing a collision with the iceberg of minimizing the
damage if it did hit, if the office on the bridge hadn't ordered full
astern AND a hard a port turn but instructing the helmsman to spin the
wheel counter clockwise to move the rudder to port which was intended
under British convention to mean move the stern to starboard. The
reason this theory may have minimized the damage and possibly prevented
or delayed the sinking time is that the headlong dash due to inertia of
a huge ship traveling at over 20 knots might well have struck only a
glancing blow if the bow had turned INTO it rather than trying
desperately to turn away from it by both moving the rudder and
reversing propulsion.

These latter theories AFAIK are still under investigation using
advanced computer and real simulations of ship models similar to
Titanic. Computer models using graphics and CAE are more effective
since many, many test modes can be quickly simulated at very little
cost while also considering other factors such as temperature, wind,
speed, hull/rudder/propeller design, and even ship design. What most
prevents these advanced simulators from finding the root cause or at
least the most important causes of the sinking with little or no doubt
or dispute is that it appears to be impossible to gather enough
scientific data to support a correct and proveable conclusion.

Again, I must bow to you and others here who have superior knowledge of
the sea and nautical design by far than me. I am speaking ONLY of my
body of anecdotal, i.e., practical and observable, evidence and some
engineering knowledge. Please elaborate and/or correct anything I have
said that you believe to be both right and wrong.

Please excuse me if I (again) insulted you, your intelligence, or
your English, Bouler, that was hardly my intent. My reply was
rather lengthy because I wanted to possibly stimulate some
discussion by commenting (from memory) pretty much the extent of
what I know about the technical side of the construction of Titanic
and its sinking, and NOT to obliquely lecture you or make fun of
your English.


You've never insulted me, but your work, engineering was very
technical so you use them easily.
My schoolenglish is good enough for a chat but when it comes to
technical stuff I need my dictionary.


Again, my apologies for piling so much on you at one time and again
using terms I wasn't sure you were familiar with. You were - and still
are - a good school teacher so you know as I do that the very best
teachers can find a way to reduce complex and technical subjects down
to the level of their students in a way that promotes both
understanding and self-esteem while preserving the scientific and
mathematical correctness. An example may help he

In High School, in both freshman Advanced Science and senior Physics, I
needed to memorize dozens and dozens of equations governing the Laws of
Uniform Motion as first poltulated by Isaac Newton. But, once I got to
college and had a freshman course in basic calculus, I could now use
only F = MA (Force equals Mass times Acceleration) to DERIVE then
entire set up Newtonian rules of motion! What a difference! Yet, my
science and physics teacher - the same man - couldn't do this because
our H.S. at that time did not teach a senior math course in rudimentary
calculus. Therefore, the analogy here is that I failed miserably to
impart what little structural, metalurgical, and nautical engineering
information I had plus their application to the Titanic sinking such
that I knew it because I failed to bring the discussion down from the
sophomore level of enginnering school perhaps to a level of hobbyists
who just like ships.

I appreciate that I didn't insult you directly as I feared but I feel I
AM guilty of "insulting" you by acting in what appeared to be a
superior manner in attempting to put too much science and math out too
fast. My apologies for THAT, Bouler.

Again, since I am obviously missing some things here in your
comments, please guide me to correcting my reading or perception
errors. Thank you.

Its simple Jerry, I simply am not familiar with technical words in
English. But I understood the whole interesting story and never had
the need to correct you.


In future, I will try even harder to define any terms I use even if it
means I may be telling you and others things you already know, rather
than risk alienating you or causing you to zone out by an overly
technical discussion. What I SHOULD have done is start off slowly and
with less words and rachet up the words and the technical jargon as my
readers absorbed what I'd already said and I could be guided by
questions and the comments of yours and others as to where to aim my
next installment of knowledge.

Still, Bouler, I hope that you and others that haven't spoken up in
this sub-thread at least gleaned SOME new knowledge despite my
clumsiness as an junior engineering professor, and I hope that today's
clarifications help in that regard.

Of course, if I am still unclear but you are still interested in what I
may be able to teach you, please help ME by asking for clarification
where needed. And, to help me avoid another of my own nautical
"disasters", please guide me when you can as to what you already know
and where your strengths and weaknesses may be on the more technical
subjects.

I hope we call ALL agree on a couple of things he one is that nobody
knows the complete story of the Titanic sinking and the other is that
nobody knows it all when it comes to ship and boat design or
seamanship. Thank you for a most stimulating discussion.

--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"


  #34   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default Link Titanic disaster

wizofwas added these comments in the current discussion du jour ...

[big snip]
I don't know if there is an English word for, I could not find it
but send you a small picture, we call then "popnagels" and use them
wit a popnageltang (see other pic), do you know them in America?
We are not allowed to use them anymore to fix damage on a car.


They're called Pop Rivets here in the US of A. And as to fixing
the sheet metal on a car, they are only used by "backyard mechanics"
to do quick repairs so they can sell the car fast.


Yes, I talked about pop rivets in my reply just sent. I rarely see them
on exterior sheet metal of cars or even on inside panels because they
are what you say - used only by backyard mechanics and collision shops
looking to shave bucks at the expense of correct repair.

That said, people with aging cars often use pop rivets to keep dangling
front and rear fascias, i.e., the plastic bumpers now in vogue, from
falling off after a fender bender and people use them to reattach
interior trim panels.But these are not good applications and pop rivets
shouldn't be used anywhere that safety or structural integrity is
important.

And Bouler, your English is just fine. I just wish mine was half as
good and English is my first and only language.

Agree strongly, wiz! Bouler's English is quite good and is even good
enough to catch me in embarrassing usage mistakes because I'm getting
lazy in my old age. grin Seriously, my language skills, especially
technical writing, spelling, grammar, etc. have deteriorated badly
since I've retired. Not much call for technical reports in private
life!

--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"


  #35   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default Link Titanic disaster

Bouler added these comments in the current discussion du jour ...

I don't know if there is an English word for, I could not find it
but send you a small picture, we call then "popnagels" and use
them wit a popnageltang (see other pic), do you know them in
America? We are not allowed to use them anymore to fix damage on a
car.


They're called Pop Rivets here in the US of A. And as to fixing
the sheet metal on a car, they are only used by "backyard
mechanics" to do quick repairs so they can sell the car fast.


Thanks, In the Netherlands its forbidden to use them in cars.
If you buy a car with pop rivets even if you didn't know, you have
to fix it proprly or you lose your car if the police checks your
car..


I'm not surprised that you have strong vehicle safety laws. I had to
have a number of expensive repairs made to the car I owned while I was
in the Army before the police inspector would pass it for a sale to a
new owner. We once had emissions inspections in many states here in the
USA but they were weak and ineffective and were repealed. We don't have
ANY safety inspections I am aware of but we should as I see many cars
driving around with very obvious safety defects and it makes me wonder
what is hidden from view that might make the car dangerous to its
occupants and to others on the road, including me.

I've talked about pop rivets a couple of times now but I agree that
they are inherently dangerous when used in safety-critical areas of a
car or places where high strength in a collision or high-speed maneuver
are important.

And Bouler, your English is just fine. I just wish mine was half
as good and English is my first and only language.

Thanks for the compliment wizofwas (special nick;-)


--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"




  #36   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default NL - Friesland _ Prinsenhof _ tacking a skutsje - file 4 of 5 DSC_8043_bewerkt.jpg

Bouler added these comments in the current discussion du jour ...

You're very well informed.


Thank you, I try. This stuff does interest me, although I do have
to admit many areas where my technical expertise is severly
lacking.


The same problem I have Jerry, its a hobby and all the technical
stuff is difficult for a teacher espechially in English.
I never worked with ships cars or other technical stuff, so you much
more technical with your history at Chryslers


Bouler, it has been said that anyone can give an hour talk on any
subject, even one they know nothing at all about. But, to give an
effective 15 minute talk or to distill a complex and technical subject
down to only 5 minutes, both of which I had to do on my job, is VERY
difficult indeed.

I most appreciate the complements you extend to me on my knowledge of
cars and other things. However, there is likely far LESS here than
meets the eye, meaning that while I can speak reasonably intelligently
about all cars, not just Chrysler, I cannot speak to specifics of even
cars designed during my tenure at Chrysler. The reason I can at least
speak to most anything vehicular regardless of company or national
origin is that the basics of the vehicle product development process
from design (styling) to engineering to testing to tooling to
manufacturing and assembly is pretty much universal throughout the
world. What separates the better car companies from the 2nd and 3rd
tier crowd is how well they APPLY basic principles and how much
proprietary knowledge they can accumulate and effectively implement to
increase features, fuel economy, safety, etc. while at the same time
increasing quality, reliability, and durability (those are 3 different
things, ask if interested) at the lowest possible cost.

I know I burned DVDs from some History Channel episodes maybe a
year or
so ago. If I get ambitious enough, I'll try to find them but I have
made a mental note to re-record them again on my DVR. It's a dumb
coincidence that a rather long episode or two aired just last week,
I think, relating the story of Titanic's construction, it's major
structural and safety weaknesses, details of the sinking itself,
and results of the most recent dives on the wreak, which I think
began in 2002 and maybe ended a year or two later (but I'm rather
hazy about that, please help me out if you can).


Sorry Jerry I cant.


OK, if these shows come on again, I'll try to snag them and perhaps I
can mail you a DVD of something you may not have seen in The
Netherlands.

Maybe I should have put in a grin or two of my own, but each of
us is gifted in different ways. Perhaps one of mine to compensate
for lack of foreign language skills is what people tell me is a
logical mind and an insatiable appetite for new information. In
fact, it has been a basic philosphy of mine back at least to my
High School days as a teen-ager that learning is a life-long
endeavor. Unfortunately, ALL of my classmates in Engineering School
were like me and I suddently found myself as a brand new freshman
in 1965 going from top 5% in my H.S. class to about the bottom
5-10% and on academic probation for 3 trimesters. One more and I'd
have flunked out. Still in all, I barely made it, I recall
something like only a 2.32 or so GPA.


Could you explain that, we have a comlete other schoolsystem, so I
don't have a clue what 2,32 GPA means.


Sorry, I did it again, damnit! GPA means Grade Point Average. We use a
4.0 grading system in community colleges and universities where 0.0 is
an E or F, 0.5 is barely passing maybe with a D-, 2.0 is a C, 3.0 is a
B and 4.0 is an A. My school, Oakland University, used a 4.3 system
where 4.3 was essentially an A+. I hope your schools at least use a
similar letter grading system.

To recap, American schools are basically organized this way: K-6
(Kindergarten through 6th grade) is called "elementary school, grades 7
and 8 "middle school" and 9-12 "high school." Colleges and universities
are divided into "undergraduate" which means one hasn't yet earned the
most basic degree, a bachelor of science or bachelor or arts, and
"graduate" degrees which include a masters or PhD (Doctor of
Philosophy) and also MD (Medical Doctor), DDS (Doctor of Dental
Surgery), and LLD (Letter of Law Doctorate, I think, i.e., an attorney.

So, under my university's grading system, I graduated barely above the
minimum necessary, a 2.0, with what amounted to be a low C+.

The only thing thats clear is that you had to work hard to graduate,
so we can shake hands.
I completely agree that learning is a life-long endeavor, for you,
for me because we are interested in a lot of things.
Not everybody thinks the same way.


Yeah, I worked my skinny ass off, Bouler! Here's what one of my days
was like: I'd get up early, eat a breakfast of oatmeal or bacon and
eggs, finish up any homework and commute to school Go to school and
study on campus until early afternoon, return home, eat a fast dinner
and go to work in a department store from 5-9 PM to earn gas money and
money to go on dates with girls. Then, study until about midnight or
when I fell asleep at the kitchen table. On weekends, I'd date, have
fun with my friends, go cruising to try to pick up girls or maybe
engage in drag racing at night while working Saturday and Sunday 8
hours and studying in whatever time was left besides sleeping.

The goal for me was two-fold: earn a degree that would enable me to try
for a high-paying job (which is why I chose engineering which is still
the highest paying job with a B.S. degree, the most I hoped to attain)
and stay out of the Army and a rice paddy in Viet Nam at least long
enough to earn my degree. Our draft system believed that having a
college degree, especially a technical one, was an important asset
militarily even if one did not become an officer (I was an enlisted
man, coming out a sergeant with 3 stripes after 20 months), so we had a
system of student deferrments that allowed only 4 years for college.
So, I HAD to get it done. I started work the next day after
commencement and fought the draft for about a year and lost. But, as it
turned out while Army life was hardly fun at the time, I DID get a
chance to tour much of southern Europe and the experience of being
completely on my own matured me greatly and turned out to be quite
useful in my later career.

Lots of pretty
smart men and women go to engineering school and the admissions
process we used here prior to affirmative action initiatives
guaranteed that only the best of the best got in.


Thats life Jerry, for my school to study for teacher there were 120
people that want that study at that specific school, after a
starting examination only 48, the maximum the school could handle
got that chance I I was one of them.


I did not have to take the standard testing of the day, such as the SAT
(Scholasitic Appitude Test) as a senior in High School, but my grades
and a recommendation from my counselor, principle, and at least one
teacher were required. Then, I had to compete against all other
applicants based on the number of freshman class openings. Once
accepted, I spent two entire days of mathematics and English aptitude
written testing, one day for each. Talk about difficult! Wow! My
English scores were OK but my math score was barely passing. My advisor
told me that if I actually cut it and graduated I would be the first in
his experience with a math aptitude that low. That sobered me up -
fast! He helped me a great deal through the many tank traps along the
way such as scheduling conflicts and getting me into the lesser
difficulty liberal arts classes that were required beyond what were
called "core curriculum" for my engineering school degree.

I don't know what the numbers were at my college as I didn't have
access to the number of applicants nor the number who failed to make
the cut on the 2-day testing gig, but I would suspect it was similary
to your experience. My engineering class itself was small, maybe 40 or
50 (I've always wished that OU had a yearbook, but they didn't) and I
think they all managed to graduate. That I know of, my ranking was 4th
from the bottom, or maybe 5th, but no higher. The class was divided
along lines of intelligence and grades informally. The smart guys
studied together and refusted to help us not so smart guys because they
wanted us to get lousy grades so the "curve", or statistical grading
system to decide the numeric score you're probably familiary with is
helped by the number of people on a test that score below the
statistical median or mean and skew the grade distribution to the low
end making it easier to earn a 3.0 or 4.0.

Very smart after all;-)
Nobody knows 100% of something is my humble opinion.
A specialist is someone who knows almost everything about almost
nothing.


I agree. Just like the gun slinger days of the old American West,
where there was ALWAYS someone faster on the draw, there is always
someone smarter than you and wealthier than you. But, there is also
at least one person dumber and poorer than you, also! grin here,
no insult intended Seriously, one of my favorite saying from the
Dirty Harry cop movies is "a man's GOT to know his limitations",
that is, be humble one can NEVER know it all, no matter how hard or
long one tries, because the colllective body of knowledge on even a
narrow subject is exploding so fast.

I think that was the best Dirty Harry ever said and I agree
completely. Yes I know those movies from Clint Eastwood, I think he
is in politics now. Now I think I need some sleep, its 4.30 AM;-)


Most people like his other quotes, basically "this is a .44 Magnum and
will blow you head clean off, now do you feel lucky? well, do you,
punk?" Yeah, that's OK, but I liked the other one because it was useful
in real-life and not just cop movies. It is interestint that you are
familiar with the Dirty Harry series. It was a money maker but not an
award-winning movie. I often use movies to illustrate things to you and
others and I wonder a lot if my international friends know what the
hell I'm talking about! grin

--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"


  #37   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default NL - Friesland _ Prinsenhof _ tacking a skutsje - file 4 of 5 DSC_8043_bewerkt.jpg

wizofwas added these comments in the current discussion du jour ...

[snip]
You're very well informed.


Thank you, I try. This stuff does interest me, although I do have
to admit many areas where my technical expertise is severly
lacking. I know I burned DVDs from some History Channel episodes
maybe a year or so ago. If I get ambitious enough, I'll try to find
them but I have made a mental note to re-record them again on my
DVR. It's a dumb coincidence that a rather long episode or two
aired just last week, I think, relating the story of Titanic's
construction, it's major structural and safety weaknesses, details
of the sinking itself, and results of the most recent dives on the
wreak, which I think began in 2002 and maybe ended a year or two
later (but I'm rather hazy about that, please help me out if you
can).


If it's the episode I'm thinking of where they found a 60 Foot(?)
section of the keel that was separated from the rest of the two
pieces of the ship. This section of the keel was from the middle of
the ship, and it broke
away from the stresses that was placed on it, thus allowing the
Titanic to break into the two pieces and sink much faster than it
normally would have. It's been a while since I've seen that
episode, but that's what I remember from it.

That's the one, wizofwas! THC has compiled 3 or 4 special episodes of
various aspects of the Titanic sinking, from the design and building of
the ship to eyewitness accounts to the court trials to early
investigates and on down to the more recent investigations after the
wreakage was finally located. I'm going to take a SWAG and say that it
wasn't positively located until the late 1990s and not successfully
dived by miniature submarine until the early 2000s. I don't know the
last dive date, but I have a vague recollection it was 2005. If you or
anyone can list the chrononology of the sinking and subsequent
investigations, I would sure be beholding!

I talked briefly about the proof that Titanic broke in half in an
earlier post but as I recall that THC episode, a marine structural
engineer used CAE and computer simulation based on eyewitness accounts
to calculate the rate of sinking and the probably angle of the hull as
it quickly went down by the bow also accounting for the effects of the
bilge pumps which obviously could not keep up. One episode I recall
asserted that engineering analysis predicted that the angle of descent,
which recall to be in the 11 degree range, would be sufficient to break
the hull between I think stacks 2 and 3, about in the middle or
slightly forward of the middle BEFORE the first successful dive found
the wreakage scattered over a several mile field. Also, I recall the
same engineer saying that the angle of descent could not have been
greater than about 6-8 deg. for the hull NOT to have broken in half.

It's tought getting old, isn't it, wiz? You and I both suffer from
"it's been awhile since I've seen that" syndrome which necessitates
being a bit timid and humble about asserting "facts" without going back
and re-watching an episode or doing some Googling first.

Good discussion, thanks for the input!

--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"


  #38   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 1,840
Default Link Titanic disaster


"HEMI-Powered" schreef in bericht
...

Thanks, In the Netherlands its forbidden to use them in cars.
If you buy a car with pop rivets even if you didn't know, you have
to fix it proprly or you lose your car if the police checks your
car..


I'm not surprised that you have strong vehicle safety laws. I had to
have a number of expensive repairs made to the car I owned while I was
in the Army before the police inspector would pass it for a sale to a
new owner. We once had emissions inspections in many states here in the
USA but they were weak and ineffective and were repealed. We don't have
ANY safety inspections I am aware of but we should as I see many cars
driving around with very obvious safety defects and it makes me wonder
what is hidden from view that might make the car dangerous to its
occupants and to others on the road, including me.

I've talked about pop rivets a couple of times now but I agree that
they are inherently dangerous when used in safety-critical areas of a
car or places where high strength in a collision or high-speed maneuver
are important.


In The Netherlands every car older than 3 year has to be checked every year
by a garage who has their qualifications to do so.
So every year in September I hope my 16 years old Renault 19 will make it.
If something is wrong it has to be fixed, if not you may not drive that car
anymore.
I think its a good thing, you don't see rusty vehicles on the road any more.
--
Greetings
Bouler (The Netherlands)




  #39   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 129
Default Link Titanic disaster

Bouler added these comments in the current discussion du jour ...

I've talked about pop rivets a couple of times now but I agree that
they are inherently dangerous when used in safety-critical areas of
a car or places where high strength in a collision or high-speed
maneuver are important.


In The Netherlands every car older than 3 year has to be checked
every year by a garage who has their qualifications to do so.
So every year in September I hope my 16 years old Renault 19 will
make it. If something is wrong it has to be fixed, if not you may
not drive that car anymore.
I think its a good thing, you don't see rusty vehicles on the road
any more.


I somewhat often see cars so crappy they are actually a danger to those
around them. Bald tires, fascias hanging literally, smoke pouring out the
tailpipe, everything. Sad.

--
HP, aka Jerry

"If it waddles like a duck and quacks like a duck, it must be a duck"


  #40   Report Post  
posted to alt.binaries.pictures.tall-ships
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 1,840
Default Link Titanic disaster


"HEMI-Powered" schreef in bericht
...

I'll try again but I thought my URL was OK. But, as to your writing
it vs. reading it, let me respectfully refer you to your exact
words, in English, of course, right under your [snip] - "here you
can read what I WROTE". Did I misunderstand/misconstrue your intent
here?


My mistake, I must have had a black out and thought wrote was the
past tense of read (sorry sir;-)


I had similar problems when trying to learn written French in college.
In English, the past-tense of "read" (reed) is also "read" but is
pronounced "redd".


Yes I know, but sometimes I'm only human and make mistakesgrin

OK, I tried it again, I THINK the way you suggested, to wit:

http://www.abajournal.com/news/titan..._rivets_book_s
ays /

I have Xnews line width set right now so that the only character
that wrapped is the slash. If I still have it wrong, please hold my
hand, you know what an Internet newbie I am!


I clicked on the link and it brought me were I had to be.
See screenshot.


That is precisely what I see, Bouler. The reason I kept coming back at
you is that I was incorrectly looking for a note where your critique of
the book could be found until I found out that you had only READ the
report here but had not WRITTEN a critique. My apologies for
misconstruing your intent.


It was me who made the first mistake to use wrote in stead of read;-)

This is actually quite old news. I can't cite the date it was first
proferred as a theory of the sinking but it must go back at least 10
years. I didn't read this review nor the book but I've read enough
about investigations of other sinkings where the wreak could be
examined more easily and watched enough shows about the Titanic over
the years to understand the issue.

Without going off in the tall weeds on lots of techie stuff,
mathematicians and statisticians describe it two ways that may be
useful in understanding where the rivet failure theory fits into the
entire Titanic investigation. First is the principle that some types of
data or testing are termed NECESSARY but NOT SUFFICIENT, meaning it may
be necessary to test for failed rivets to explain the Titanic sinking
but it is not sufficient on its own and one must look further for a
complete and proveable explanation.

Second is the principle of determining "root cause". ALL problems,
failures, anything that goes bad may have one or more causes, perhaps
dozens, or even thousands of causes, but there is only ONE so-called
root cause. Some equate this with "most important cause" but that is
inaccurate. Perhaps the best example I can cite is the 1985 space
shuttle disaster where it blew up 85 seconds into launch. Some hundreds
of causes were found and resulting in nearly 1,000 engineering changes
to the shuttle and its booster rockets. But, the ROOT CAUSE turned out
to be O-rings on the fuel tanks that failed and allowed leakage during
a cold-weather launch. This is the first launch of a space vehicle in
below-freezing weather at Cape Kennedy in Florida. Continuing just a
bit, the cold weather itself was also a cause of the disaster, of
course, yet it couldn't have caused it solely but ONLY because the O-
rings failed. In the theory of statistics, specific failure mode
analysis (sorry for the jargon but it is necessary to be precise and
accurate here, please just accept it, OK?) one strives to identify ALL
the modes of failure then use deductinve reasoning based on the facts
found and inductive reasoning based on facts NOT found to arrive at a
conclusion as to the most likely root causes in descending order of
importants and probability of likelihood. Then, using the probability
and statistics methods of positive, negative, and null hypothesis
testing, one attempt to isolate the ONE cause which MUST be fixed in
order to prevent a future failure.


I completely understood the above and rememberd he horrible view of that
disaster on TV.
Als I see you're very accurate and logic in explaining the problem.
I think its the same accuracy you use in engineering cars.
Ik don't have that background with cars nor with ships so I'm not an expert
on nautical things, I just love ships..

Again, my apologies for the jargon and for the pretty deep math stuff
but again, please just go along for a bit more. One can remove causes
1, 2, 999 and STILL experience more failures if the removed, i.e.,
fixed, causes do not include the so-called root cause. Now, the
unfortunate bad side to failure mode analysis goes back to "necessary
but not sufficient". It is NECESSARY but sadly NOT SUFFICIENT to remove
the root cause if enough OTHER causes remain. Back to Titanic, failed
rivets may or may not be the root cause but clearly are A cause of the
tragic sinking. AFAIK, NO root cause has been developed and the latest
theory I am aware of, besides the hull plate metalurgy things I already
talking about, inadequate watertight bulkheads discussed by another
poster, and many other things, suggests that perhaps a secondary or
even the primary cause of the accident may have been bottom hull
scraping along an out-cropping of the berg, noted in other sinkings by
icebergs through history. Again, unfortunately the Titanic bow section
lies at an orientation that does not permit easy examination of its
bottom.


I get used to your technical jargon (Learning fast because I want to kwow
what you're writing)
My dictionnary was my friend the last days;-)
Important is I need not to know all the words to undrstand you.
Combining and a little logic helps a lot.

And, so the quest for as many causes of the sinking as possible goes
on. It might be easier if two things were true that are not: 1) the
wreak was in much shallower water and 2) international law and the
desire of all to respect the memories of the dead now prohibit
destructive testing or the bringing up of large pieces of the wreak
even if put back to rest on the ocean floor at a later time.

Bouler, I looked here but cannot find a reference to you
specifically. Could you please provide a closer link into the
American Bar Association web site where you wrote an article on
the rivets of the Titanic?

I did not write it, I read it, I'm a teacher, not a technichen.;-)

Please see my comment on this above and help me understand where I
went wrong.


I did, and and you were right and I meant read in stead of wrote,
humble apollogies.;-)


Cool your jets, Bouler, it is much my mistake as yours. I was aware of
your 3 languages and I am quietly aware of mistakes in spelling,
punctuation, grammar, and usage that you make that are quite similar to
most people who use English as a 2nd or 3rd language. I don't point
them out to you either in public or even in private because it is
inherently insulting. Rather, if I can, I simply figure out what is
correct and more on or perhaps ask question.

Specific to my mistake on this one, though, my intentions were MOST
honorable because my intent was to HONOR you for what I perceived as an
important contribution to the collective pool of knowledge about the
Titanic sinking. Sorry that I already knew about the rivet theory but I
was about to flood you with complements for superior knowledge of the
sinking based on careful research that enabled the ABA to quote you
directly. So, again, please accept my apologies for both
misunderstanding you and for snowing you under in what must've looked
to you like I was trying to refute your expert testimony. You are far
more the nautical expert then me, I just have a few - very few! -
tricks up my old-time engineer's sleeve when it comes to understanding
the science behind the sinking's many theories. But, you can trust and
I thank you for the fact that I now have a Favorite in IE6 pointing to
the ABA article.


I'm glad to stand on my feeth again, when you were talking that I wrote that
article I was sitting on a cloud for a while but fell off and that hurts
grin

Yes, Bouler, I'm aware that you're gifted with two more languages
than I am, save a dozen words I might be able to cobble together in
Polish or German.


You forget German and French, but not so good as the other three;-)


In my case, my mother was Polish written and spoken bi-lingual and I
picked up a few words here and there because we went to Massachusetts
every year when my father was laid off at the Plymouth Plant and heard
lots of Polish spoken at family gatherings. And, in my stay in West
Germany in the Army circa 1971, I picked up enough to order a good meal
anywhere - "eine wiener schnizel mit pomme frits und salade, und eine
bier, bitte, snell!". grin


Feeding yourself is very important so I can imagine this sentece was a
lifesavergrin

And, yes, rivets were used in cars, as recently as in the 2002
Chrysler Prowler I owned a few years ago. The BIG difference was
that car rivets are relatively small and generally are simple
attachment devices with similar strength to a sheet metal screw.
They're typically inserted with a ribbon of rivets along a tape in
something like an ammo belt for a machine gun, with the rivet gun
itself being either a manual tool one squeezes to get the force or
an air tool, as used in early car applications.


I don't know if there is an English word for, I could not find it
but send you a small picture, we call then "popnagels" and use them
wit a popnageltang (see other pic), do you know them in America?
We are not allowed to use them anymore to fix damage on a car.


These are exactly what I was referring to that I believe are still in
use in cars today. We call these "pop rivets", perhaps the English
translation of "popnagels", I don't know that.


nagel=nail in English so it's understandeble.

But, NOT red-hot rather large rivets as were used until even the
post- WWII years in sky-scaper steel girder construction and are
still used in bridges, much as ships used them. It is the brittle
metalurgy of the hot rivets as used on ships like Titanic which are
alleged to have failed causing the sinking. I say "alleged" because
it CAN be shown with some difficulty that SOME rivets are
defective. It is difficult because they are severely
corroded/rusted after some 80+ years in salt water. I also use the
term "alleged" because I don't personally know of any nautical
structural engineers or marine archeologists working with engineers
that can positiviely point to the rivets, again unfortunately
because that part of the hull is laying on its starboard side
covering up the "problem."


There are so many sorts of rivets, from small to large, maybe you
can find a picture on Google. Ships is my hobby, but I never worked

with ships like you did with cars.

Bouler, I am neither a car mechanic nor a car designer, I had a
relatively minor role early in my career in the development of front
and rear car SEATS. But, through my long career as I changed from pure
engineering into a variety of jobs related to computers and CAD, I
began to get to know more and more people from technicians and
mechanics to designers and draftsmen, engineers, supervisors, managers,
chief engineers, all the way up the vice presidents within Engineering
and Manufacturing. That's not bragging, it was just necessary for me to
know these people in order to do MY job of supporting their job by
providing CAD training and support and OA (Office Automation) support
to their people. Naturally, the more I could glean about the product
development process, the better I was able to do this.


Ok, but you spend energy to learn stuff t make yourself and other people
working as a team, I respect that very much.
Is CAD Computer aided design or has it something to do with the
computerprogram autocad?


That said, the car biz is VERY complex, and my knowledge is much more
complete - such that it is at all - on the sheet metal body, soft and
hard trim, and other aspects of the body of the car than it is for the
electrical systems, and my knowledges drops off very fast for engine
and transmission design, and for suspensions and brakes.


Well that makes you standing on your feeth again IMO, I thought you did know
everything of cars.
I worked a lot on all the secondhand cars I bought, I came very far with the
mecanical stuff, but todays cars you cannot do anything as an amateur. Far
to much electronic in cars and thats not my specialty.

One of the many things I had to learn fast the hard way when I first
took my job at Chrysler was the difference between an education in the
basic mathematics, physics and chemistry underlying the science of
engineering from its practical application to the design, development,
testing, and manufacturing of actual parts and systems. There is a big,
BIG difference I found out quite painfully between engineering
education and practical engineering training and experience. So, just
as I can hardly do the complex math I once could, I can also no longer
talk with any certainty about what I'd learned over 3 decades about how
cars are put together. But, just as it is said that one never forgets
how to ride a bicycle, I still remember just enough to be dangerous.
grin

Perhaps in your case, your love of ships that is your hobby has enabled
you to take a pragmatic approach to learning about things nautical in
the same way that my interest in cars from my very early childhood was
pole-vaulted into an engineering degree and then with a LOT of time and
effort, a successful career. This effort for me has borne great fruit
in my current hobby of collecting car picture maybe the same as what I
am sure has been an equally great investment in learning about all
kinds of boats and ships has aided you in your hobby. Also, where you
live and where I live go a long way to why we know what we know and
don't know what we don't know, agree at all?

One last comment on rivets in cars. I think you're correct that no
one uses them for structural purposes anymore, probably not for a
long time. But, I THINK they can still be found in non-structural
applications such as attaching plastic trim on the interior or
exterior of the car where there's little stress and loading except
to keep the thing in place.


I think thats allowed, but not to fix severe damage on the outside.


What is much more common today are structural adhesives which allow
very fast assembly with no fasteners at all but with all of the
strength of a traditional fastener such as a screw or pop rivet.
Another fastener in common use today is the so-called single use
plastic push fastener. One type of these are called "Christmas tree
fasteners" because the little pieces of plastic has small ribs that
make them look like a Xmas tree. They are inserted from the back side
of a trim panel of some sort and pushed into a pre-stamped hole in the
inside sheet metal. They only go in once and are destroyed by the
removal process if a repair is need, so new fasteners must be used.


I know them.

The American use of visible chrome-plated sheet metal screws with a
Phillips head went on for decades until the Japanes automakers such as
Honda and Toyota taught us quite painfully in the 1980s that interior
and exterior trim could be attached more firmly yet with a much better
look, fit, and finish with NO visible fasenters, hence the rapid rise
of adhesives and the one-time fasteners. Today, a visible screw or
rivet is almost impossible to find and manufacturers pride themselves
oon the good looks of even things like the engine compartment where
everything is hidden vs. the olden days where there were tubes, pipes,
hoses, clamps, wiring harnesses, all sorts of ugly stuff snaking it's
way around to support the powertrain.


Right and working on a car need special tools so fixing a car by myself is
almost over and out.


Indeed Jerry a lot of theories.
Normally the rudder goes left if the ship must go to starboard.
I do'nt know how this is on big ships, because with a steering
wheel its technically simply to change the direction.

Huh? If the rudder turn to port, i.e., left when looking down on it
from above, would the water not force the stern to starboard and
thus the bow to port, the intended direction? What I was talking
about was the British convention which literally meant turn the
RUDDER to the opposite direction from the turn command from the
bridge.


I said its technically possibel, I have a drill that can fo forward
and backword, so why not a steering wheel.
Of course this is pure hypotetic, but it must be possible.


You mean "hypothetical" here, I assume? Yes, it is possible, but one
would have to get the water to flow over the rudder in a different way
than is traditional for a rudder steering system. One way might be the
growing use of water jets in patrol boats, pleasure craft, even larger
warships that squirt a high-pressure high volume stream of water out to
both propel and steer the craft. Obviously here, the force of the water
squirting to starboard would move the stern to port and the bow to
starboard.


Yes I mean hypotatical and dont know if its used in ships.

Now, if you really mean that a rudder or water jet steering/propulsion
system can actually move physically to starboard and the BOW moves to
port, please describe it to me, as I'm not familiar with that I don't
think. Your analogy of a reversible drill motor is a good one and it's
application to a boat or ship is that which one major theory of the
Titanic sinking is based on. Namely, that it MIGHT have been more
effective in preventing a collision with the iceberg of minimizing the
damage if it did hit, if the office on the bridge hadn't ordered full
astern AND a hard a port turn but instructing the helmsman to spin the
wheel counter clockwise to move the rudder to port which was intended
under British convention to mean move the stern to starboard. The
reason this theory may have minimized the damage and possibly prevented
or delayed the sinking time is that the headlong dash due to inertia of
a huge ship traveling at over 20 knots might well have struck only a
glancing blow if the bow had turned INTO it rather than trying
desperately to turn away from it by both moving the rudder and
reversing propulsion.


You're examening the consequences, I like that.

These latter theories AFAIK are still under investigation using
advanced computer and real simulations of ship models similar to
Titanic. Computer models using graphics and CAE are more effective
since many, many test modes can be quickly simulated at very little
cost while also considering other factors such as temperature, wind,
speed, hull/rudder/propeller design, and even ship design. What most
prevents these advanced simulators from finding the root cause or at
least the most important causes of the sinking with little or no doubt
or dispute is that it appears to be impossible to gather enough
scientific data to support a correct and proveable conclusion.

Again, I must bow to you and others here who have superior knowledge of
the sea and nautical design by far than me. I am speaking ONLY of my
body of anecdotal, i.e., practical and observable, evidence and some
engineering knowledge. Please elaborate and/or correct anything I have
said that you believe to be both right and wrong.


My knowledge of ships is not much more than yours, I mostly dont go into
technicak stuff, I like to see a nice ship and can enjoy it.

Please excuse me if I (again) insulted you, your intelligence, or
your English, Bouler, that was hardly my intent. My reply was
rather lengthy because I wanted to possibly stimulate some
discussion by commenting (from memory) pretty much the extent of
what I know about the technical side of the construction of Titanic
and its sinking, and NOT to obliquely lecture you or make fun of
your English.


You've never insulted me, but your work, engineering was very
technical so you use them easily.
My schoolenglish is good enough for a chat but when it comes to
technical stuff I need my dictionary.


Again, my apologies for piling so much on you at one time and again
using terms I wasn't sure you were familiar with. You were - and still
are - a good school teacher so you know as I do that the very best
teachers can find a way to reduce complex and technical subjects down
to the level of their students in a way that promotes both
understanding and self-esteem while preserving the scientific and
mathematical correctness. An example may help he

In High School, in both freshman Advanced Science and senior Physics, I
needed to memorize dozens and dozens of equations governing the Laws of
Uniform Motion as first poltulated by Isaac Newton. But, once I got to
college and had a freshman course in basic calculus, I could now use
only F = MA (Force equals Mass times Acceleration) to DERIVE then
entire set up Newtonian rules of motion! What a difference! Yet, my
science and physics teacher - the same man - couldn't do this because
our H.S. at that time did not teach a senior math course in rudimentary
calculus. Therefore, the analogy here is that I failed miserably to
impart what little structural, metalurgical, and nautical engineering
information I had plus their application to the Titanic sinking such
that I knew it because I failed to bring the discussion down from the
sophomore level of enginnering school perhaps to a level of hobbyists
who just like ships.

I appreciate that I didn't insult you directly as I feared but I feel I
AM guilty of "insulting" you by acting in what appeared to be a
superior manner in attempting to put too much science and math out too
fast. My apologies for THAT, Bouler.


I'm learning fast Jerry.

Again, since I am obviously missing some things here in your
comments, please guide me to correcting my reading or perception
errors. Thank you.

Its simple Jerry, I simply am not familiar with technical words in
English. But I understood the whole interesting story and never had
the need to correct you.


In future, I will try even harder to define any terms I use even if it
means I may be telling you and others things you already know, rather
than risk alienating you or causing you to zone out by an overly
technical discussion. What I SHOULD have done is start off slowly and
with less words and rachet up the words and the technical jargon as my
readers absorbed what I'd already said and I could be guided by
questions and the comments of yours and others as to where to aim my
next installment of knowledge.

Still, Bouler, I hope that you and others that haven't spoken up in
this sub-thread at least gleaned SOME new knowledge despite my
clumsiness as an junior engineering professor, and I hope that today's
clarifications help in that regard.

Of course, if I am still unclear but you are still interested in what I
may be able to teach you, please help ME by asking for clarification
where needed. And, to help me avoid another of my own nautical
"disasters", please guide me when you can as to what you already know
and where your strengths and weaknesses may be on the more technical
subjects.

I hope we call ALL agree on a couple of things he one is that nobody
knows the complete story of the Titanic sinking and the other is that
nobody knows it all when it comes to ship and boat design or
seamanship. Thank you for a most stimulating discussion.

You're a very clever man, you're apoligizing before I can even say
somethinggrin
But you have nothing to apologize for Jerry you're smart enough to build in
a lot of caution.
If we are goïng on this way we're writing a book together;-)
--
Greetings
Bouler (The Netherlands)


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
NL - Friesland _ Prinsenhof _ tacking a skutsje - file 2 of 5 DSC_8041_bewerkt.jpg Jeronimus[_3_] Tall Ship Photos 6 May 11th 08 10:55 PM
NL - Friesland _ Prinsenhof _ tacking a skutsje - file 3 of 5 DSC_8042_bewerkt.jpg Jeronimus[_3_] Tall Ship Photos 0 May 7th 08 09:27 AM
NL - Friesland _ Prinsenhof _ tacking a skutsje - file 1 of 5 DSC_8040_bewerkt.jpg Jeronimus[_3_] Tall Ship Photos 0 May 7th 08 09:27 AM
NL [Friesland] various pictures - file 13 of 14 Friesland-13.jpg Jeronimus[_3_] Tall Ship Photos 0 December 22nd 07 11:11 AM
NL [Friesland] various pictures - file 12 of 14 Friesland-12.jpg Jeronimus[_3_] Tall Ship Photos 0 December 22nd 07 11:11 AM


All times are GMT +1. The time now is 08:41 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017