LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Joe Here
 
Posts: n/a
Default Chrysler Outboard Question.


[Snip]
Again, I don't know your engine, but none of mine retard the spark at
WOT. I have 2 Evinrudes, 2 Johnsons, and 1 Merc. Do you have an
Owner's Manual, or a Service Manual? The Owner's Manuals don't
normally tell you what you need to know.


I have a Service manual, and all it states is that at WOT, adjust the
linkage so that two marks on the timing (advance?) plate align.
So, when I set it to the book, then at about 75% throttle, timing
actually advances slightly past the marks, then drops back
and lines up at WOT??

Everything looks normal and original, as far as the linkages etc. go.
My Service Manual is a Clymer, and it's pretty vauge.



Any help is much appreciated,

Joe.


noah

Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outboard Motor Bracket question John Wright General 0 July 28th 03 04:46 AM
Prop Question... Part II Matt General 1 July 24th 03 01:58 AM
A suitable outboard for a Intex Seahawk 500 ? Lago Jardin General 1 July 15th 03 11:59 AM
malibu response question J.W. Frank General 26 July 11th 03 02:26 AM
Good outboard engine forums? Rob Pilgrim General 4 July 11th 03 12:30 AM


All times are GMT +1. The time now is 07:28 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017