On Thu, 12 Feb 2015 12:08:22 -0500, wrote:

Have you tried this

http://tinyurl.com/qe5chu2

It seems to cycle my woodsman but I only fired a couple.

===

I've tried them. They cycled OK in my Hi Standard but they didn't
seem to stabilize properly. A fair number of them passed through the
target sideways for some reason.

On Thu, 12 Feb 2015 13:53:11 -0500, wrote:

On Thu, 12 Feb 2015 13:13:22 -0500, Wayne.B
wrote:

On Thu, 12 Feb 2015 12:08:22 -0500, wrote:

Have you tried this

http://tinyurl.com/qe5chu2

It seems to cycle my woodsman but I only fired a couple.

===

I've tried them. They cycled OK in my Hi Standard but they didn't
seem to stabilize properly. A fair number of them passed through the
target sideways for some reason.

It may have to do with the twist rate of the rifling. I know the army
had to change the twist rate of the M16s when they went to the heavier
NATO bullet. I think I linked an article about it here a while ago.
I was just popping them off in the screen cage so I did not really see
them hitting paper. I was just curious how quiet they were and if they
would cycle. It is a little quieter than a regular lr or my shot pin
nailer.

===

You really need a suppressor to make them truly quiet. If you want
quiet around the house and don't need a lot of power, an inexpensive
CO2 BB pistol from Walmart is really hard to beat. I have an Umarex
X-B-G which is very effective on pests and also very quiet. The CO2
cartridges last a long time and a bottle of BBs is darn near a
lifetime supply. The muzzle velocity of 410 fps packs a surprising
amount of punch.

https://www.google.com/#q=umarex+x-b-g

http://www.sportsmansguide.com/product/index/umarex-xbg-177-cal-co2-bb-pistol?a=979238