| Home |
| Search |
| Today's Posts |
|
#24
posted to rec.boats.electronics
|
|||
|
|||
Raymarine S1/ST6002 and NMEA
On Mon, 27 Apr 2009 22:04:44 +0200, "Bjarke M. Christensen"
Bjarke(snabel-a)grevestrand(punkt)dk wrote: Is the NMEA signal from your Garmin feed (physical) to the ST6002 dispaly or to the S1 computer ? Bjarke The Garmin GPS NMEA output is connected to the S1 computer. The S1 will go to a waypoint or follow a route, and display data from the GPS. The display/controller is connected to the computer via only Seatalk. Rick |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Raymarine and third party equipment via NMEA gives problem | Electronics | |||
| Maretron SSC200 - NMEA 2000® / NMEA 0183 Solid State Compass | Electronics | |||
| A question about NMEA, AIS and Raymarine | Electronics | |||
| Speaking of NMEA, is there a NMEA alarm monitor? | Electronics | |||
| Raymarine ST60 Multi does not convert from NMEA Input to Seatalk | Electronics | |||
Threaded Mode
