Rick Morel wrote in
:

On Mon, 27 Apr 2009 08:37:59 -0500, Geoff Schultz
wrote:

But, before I digress...the conclusion there is that the ST600x will
display NMEA data which is presented to it, but it won't translate
those
sentences into SeaTalk format. Thus if you have another SeaTalk based
display on the boat, you won't see the data being fed to the ST600x
with
the NMEA input. To convert NMEA to SeaTalk, you need a box which
bridges the two.

I'm not 100% sure what you mean when you say a "Garmin GPS". Are you
talking about a GPS antenna or a chartplotter? For example, I have a
Garmin GPS antenna which connects to my course computer via NMEA and I
also have a NorthStar chartplotter connected via NMEA and a RayMarine
chartplotter connected via SeaTalk. All of these talk to one another
and my ST6001 just fine. However, let's say that I had a wind
instrument connected to my ST6001 via NMEA. The ST6001 would show the
wind data, but my RayMarine C80 wouldn't display the wind data.


-- Geoff


Geoff, I don't know how I could have been clearer. I wrote:

"I have a Garmin GPS connected via NMEA.
The S1 uses the GPS info to go to a waypoint or follow a route, and
displays the info from the GPS - goto a waypoint on the GPS, hit
"Track" on the S1, it beeps and gives a turn direction and course, hit
"Track" again and the S1 steers to the waypoint or follows the route."

A Garmin _GPS_ the S1 uses to go to a waypoint or follow a route.

I don't have any other Raymarine instrument displays, but I have to
believe the S1 does translate NMEA to Seatalk because the Garmin NMEA
is physically connected to the S1 Computer, and the S1
Display/Controller, which is physically connected via Seatalk only,
displays the GPS data. So the NMEA data has to be available on the
Seatalk buss for the display to get it, doesn't it?

Rick

Rick,

The RayMarine S1 is a course computer. It has has no display. How do
you input the course to it? The ST600x and any other controller will
beep when it's time to change waypoints.

From what I can tell, your Garmin GPS antenna is connected to the S1
course computer, which is translating the lat/long into SeaTalk. There
has been no argument about this. The whole discussion has been about
connecting a NMEA instrument to the ST600x NMEA input and the ST600x
translating the NMEA data to SeaTalk. Your antenna is connected to the
S1 course computer and not the ST600x controller. What are you talking
about?

-- Geoff
www.GeoffSchultz.org