Home |
Search |
Today's Posts |
#31
posted to rec.boats.cruising
|
|||
|
|||
Injection Limiter adjustment
On 2008-03-25 20:09:32 -0400, " said:
On Mar 25, 12:56 pm, "Roger Long" wrote: Refresh my memory or check this. Is the hunting only at full RPM? Typically when it is acting up it can hold ~1000 pretty steady even with a load but looses power above that if any load is applied and starts hunting. The cycle always starts with a loss of rpm and may drop all the way off to slow idle and then a slow recovery. As things warm up the dips become smaller and smaller. I know what it sounds like but... With this restatement, I'm thinking along the lines of a restriction. Remember that Roger stopped needing the electronic pump when he replaced the rubber hoses. Is it possible that the hose is kinked or has something resting on or against it that could restrict flow? Is it old enough that the interior of the hose could be swelling up? You might be able to swap hoses to see if the problem switches engines. I'd blow out the lines to clear any foreign material while I was at it. -- Jere Lull Tanzer 28 #4 out of Tolchester, MD Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
steering adjustment | General | |||
SeaDoo Jet Boat Carb Adjustment | General | |||
Steering Adjustment. | General | |||
Valve adjustment-Merc Alpha One | General | |||
throttle adjustment | General |