Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Sep 5, 9:49 pm, Bob wrote:
On Sep 4, 8:24 am, " wrote: Oh, forgot my favorite boat that is much dismissed................... look at the 1970s Cascade boats. Should be several up there. Bob Bob, Thanks. Do tell me more about the Cascade 27 and how it compares with a Catalina 27. Is this the boat you bought in PT? Richard |
#2
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Sep 6, 8:21 am, "
wrote: On Sep 5, 9:49 pm, Bob wrote: On Sep 4, 8:24 am, " wrote: Thanks. Do tell me more about the Cascade 27 and how it compares with a Catalina 27. Is this the boat you bought in PT? Richard Hi Richard: The boat I bought in PT is a Gannon built and finished 1979 Freya 39. A bit more robust that a Cascade 27 but better suited for what I do. I have sat on and yacked with several ownners of Cascades over the years. They vary suprisingly in finsih and configuation realy can not comment other than the 1970s hulls are bulit proof in that you gots lots of hand layed glass. ALl the owners I talked to said they were stable predictable boats. Not fast by Wilburs standards but good boats. Just need to remember with any 1970s boat you'll replace the rig, portlights (windows) and fuel tank; rebed all deck hardware , and gut/ the DC/AC electric pannel and most the wire. You can either do it right the first time or end up llike Skip & Lydia half assing piece by piece along the road. Personally i belive cruising should be fun not one repair after another. Did you look at the Mahina link I left? There are lots of really sound boats out there for where you plan on cruising. Dont get locked into an one boat just because its popular. Take the Freya for example. NOt many out there. Most folks haven't heard of them, but a very fine boat fo rwhat I do. ALthough a very slow boat according to Willl burr. If your like most, including myself, youll find toooo many boats to consider. I'll leave you with what a surgeon friend of mine says, "better is the enemy of good." Get a good boat, not the "best boat," clean it up, and go have some fun! Bob |
#3
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Sep 6, 11:08 am, Bob wrote:
On Sep 6, 8:21 am, " wrote: On Sep 5, 9:49 pm, Bob wrote: On Sep 4, 8:24 am, " wrote: Thanks. Do tell me more about the Cascade 27 and how it compares with a Catalina 27. Is this the boat you bought in PT? Richard Hi Richard: The boat I bought in PT is a Gannon built and finished 1979 Freya 39. A bit more robust that a Cascade 27 but better suited for what I do. I have sat on and yacked with several ownners of Cascades over the years. They vary suprisingly in finsih and configuation realy can not comment other than the 1970s hulls are bulit proof in that you gots lots of hand layed glass. ALl the owners I talked to said they were stable predictable boats. Not fast by Wilburs standards but good boats. ....And I assume heavy with a full-keel. In other words, what we call here in the Pac NW an "offshore-capable" boat. "Offshore" is a mystical word here. Because we have a HUGE breakwater known as Vancouver Island, most boaters never go "offshore". So, there's a mystique around it. "Did you hear about Bob on 'Endless Love'? He went offshore..." So there's a romantic appeal to an "offshore" boat. OTOH, I call them GTE: Get There Eventually. There are virtually NO conditions "inside" that require a full keel, and since most of the time the winds are light (and Murphy says they're also blowing from your destination!), you need a boat that will sail well upwind in light air, or you'll be motoring wherever you go. So, if you want a "good solid boat" like a Cascade (or Columbia, Grampian, Alberg...) be prepared to either wallow in the swells a lot, or motor. If you want to sail, you need a lighter-weight, fin-keel boat. (Yes, Columbias and Grampians are both fin-keel, but perform terribly in light air!). That's not to say you can't get a well-built boat, though. The Cal/Crown line is VERY well-built, but sail quite well in any conditions you find "inside" (and not bad "outside", like the WCVI, but probably not Oregon Coast). Islanders seem well-built as well. Ericsons are great, although the 27 is another GTE. Where does Catalina fit into all this? They're EXCELLENT in terms of a well-sailing boat with lots of room. Their "fit and finish" are not that great, so the older boats tend to have lots of little things wrong with them. I wouldn't take a Cat 27 "offshore" (although many have), but they're actually better suited for the Pac NW than a Cascade. Just my opinion... druid http://www.bcboatnet.org |
#4
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
druid wrote:
On Sep 6, 11:08 am, Bob wrote: On Sep 6, 8:21 am, " wrote: On Sep 5, 9:49 pm, Bob wrote: On Sep 4, 8:24 am, " wrote: Thanks. Do tell me more about the Cascade 27 and how it compares with a Catalina 27. Is this the boat you bought in PT? Richard Hi Richard: The boat I bought in PT is a Gannon built and finished 1979 Freya 39. A bit more robust that a Cascade 27 but better suited for what I do. I have sat on and yacked with several ownners of Cascades over the years. They vary suprisingly in finsih and configuation realy can not comment other than the 1970s hulls are bulit proof in that you gots lots of hand layed glass. ALl the owners I talked to said they were stable predictable boats. Not fast by Wilburs standards but good boats. ...And I assume heavy with a full-keel. In other words, what we call here in the Pac NW an "offshore-capable" boat. "Offshore" is a mystical word here. Because we have a HUGE breakwater known as Vancouver Island, most boaters never go "offshore". So, there's a mystique around it. "Did you hear about Bob on 'Endless Love'? He went offshore..." So there's a romantic appeal to an "offshore" boat. OTOH, I call them GTE: Get There Eventually. There are virtually NO conditions "inside" that require a full keel, and since most of the time the winds are light (and Murphy says they're also blowing from your destination!), you need a boat that will sail well upwind in light air, or you'll be motoring wherever you go. So, if you want a "good solid boat" like a Cascade (or Columbia, Grampian, Alberg...) be prepared to either wallow in the swells a lot, or motor. If you want to sail, you need a lighter-weight, fin-keel boat. (Yes, Columbias and Grampians are both fin-keel, but perform terribly in light air!). That's not to say you can't get a well-built boat, though. The Cal/Crown line is VERY well-built, but sail quite well in any conditions you find "inside" (and not bad "outside", like the WCVI, but probably not Oregon Coast). Islanders seem well-built as well. Ericsons are great, although the 27 is another GTE. Where does Catalina fit into all this? They're EXCELLENT in terms of a well-sailing boat with lots of room. Their "fit and finish" are not that great, so the older boats tend to have lots of little things wrong with them. I wouldn't take a Cat 27 "offshore" (although many have), but they're actually better suited for the Pac NW than a Cascade. Just my opinion... druid http://www.bcboatnet.org Cascade 27 is a fin keel with balanced rudder that goes well in light air. Gordon |
#5
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 2007-09-04 11:24:10 -0400, "
said: My wife and I have had a 30 year old swing keel Catalina 22 for five years.We just spent four weeks sailing it from Port Townsend WA, where we live, to Princess Louisa Inlet. The boat handled everything fine, but we are beginning to think we want something a bit bigger if we are going to do more of the same and perhaps go further north. We did the same 15 years ago. Short story: I suggest you determine what you can reasonably expect to do for the next 5-7 years and list what you need in a boat, particularly accommodations as they will mean quite a bit more than they did in the 22. I'll tell you, the first time you stand up to put on your pants will be an eye-opener! 95% of the time, long distance cruisers are in a harbor, so accomodationss become more important the further and longer you go. Our priorities: Full-time berth for two real adults. (75% of the boats out there fail that test.) Making up the bed each evening gets old fast. Head, galley, interior seating, stowage, and cockpit followed in rough priority. Only after both of us were satisfied with that did my concerns (keel, hull form, sail plan, etc.) come into play. After some pretty-fair cruising, I'd add having a reliable engine with fairly high priority. A "slow" sailboat can be considerably improved with a good set of sails. Ours is fast enough stock, but I like speed, so we have a couple of semi-custom jibs, a proper main and great cruising chute. We generally keep up with (or pass) boats 10' longer, and regularly pass 30-35' cats under chute. After 16 seasons of doing far more than our pre-purchase expectations, Xan's still sufficient for our expected needs for the next 5-7 years, including an extended trip at least in the Bahamas, possibly through the BVI. I hope you do as well. -- Jere Lull Tanzer 28 #4 out of Tolchester, MD Xan's new pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI pages: http://homepage.mac.com/jerelull/BVI/ |
#6
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 2007-09-04 11:24:10 -0400, "
said: we are beginning to think we want something a bit bigger if we are going to do more of the same and perhaps go further north. Oh, a good site from someone who did the same thing: cruisenews.net (Oh, and guess what boat he got? [it wasn't the Alberg which was his ideal when he started the site.] ;-) -- Jere Lull Tanzer 28 #4 out of Tolchester, MD Xan's new pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI pages: http://homepage.mac.com/jerelull/BVI/ |
#7
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Dave" wrote in message
... On Tue, 04 Sep 2007 15:24:10 -0000, " said: Does anyone have any comments on the C27, or alternative boats of this size ? You might take a look at the CS27. We looked at a lot of Catalina 27s before buying our CS. The CS is just a small amount faster, and is a well-built Camper and Nicholson design. It does carry a slightly greater draft than the Catalina unless you get it in the shoal draft version. I've sailed a C27 for several years. They're fairly bullet-proof and sail well. You can also get them for a very decent price and in good shape if you're willing to look carefully. Ours had the ol' Atomic 4, but we never had a problem with it... started like a car engine on the first try. You just need to remember to use the blower. There are lots and lots of them out there, so getting parts/info is easy. All that said, I almost bought a CS when I sold my other boat. I was very impressed with the design and sailing qualities. -- "j" ganz @@ www.sailnow.com |
#8
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Tue, 04 Sep 2007 10:01:44 -0700, Capt. JG wrote:
"Dave" wrote in message ... On Tue, 04 Sep 2007 15:24:10 -0000, " said: Does anyone have any comments on the C27, or alternative boats of this size ? You might take a look at the CS27. We looked at a lot of Catalina 27s before buying our CS. The CS is just a small amount faster, and is a well-built Camper and Nicholson design. It does carry a slightly greater draft than the Catalina unless you get it in the shoal draft version. I've sailed a C27 for several years. They're fairly bullet-proof and sail well. You can also get them for a very decent price and in good shape if you're willing to look carefully. Not very many CS 27's here on the West Coast. Also, didn't like the outboard rudder - for one thing, how do you convert to wheel steering if you want to? True, it's a well-made, good sailing boat, but just not a lot of them out here (and would cost $5K to ship one from the East). Ditto the Ericson 28: a VERY nice boat, but can't find one out here. (Lots of E27's, which are COMPLETELY different - very slow!) OTOH, you Easterners (and US) are devoid of the Venerable Crown 28 - an exellent boat built here in North Van. druid http://www.bcboatnet.org |
#9
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
I have owned a 1982, 27 Mirage designed by Robert Perry until last year.
I have cruised the Bay of Fundy, Gulf of St Laurent, Coast of Maine and Nova Scotia for years not to mention Lake Champlain. The problems I had with this Mirage were related to the diesel engine. Before finalizing your decision I would look this Robert Perry design. As for the CS 27 I would inquire about the bow buoyancy in rough weather. The shape of the hull (similar to a cognac class) is such that when close to concrete or wood wharf the freeboard makes contact before the toe rail. Many people have used fender boards with positive results. As for the Catalina I do not have any comment. "druid" wrote in message news ![]() On Tue, 04 Sep 2007 10:01:44 -0700, Capt. JG wrote: "Dave" wrote in message ... On Tue, 04 Sep 2007 15:24:10 -0000, " said: Does anyone have any comments on the C27, or alternative boats of this size ? You might take a look at the CS27. We looked at a lot of Catalina 27s before buying our CS. The CS is just a small amount faster, and is a well-built Camper and Nicholson design. It does carry a slightly greater draft than the Catalina unless you get it in the shoal draft version. I've sailed a C27 for several years. They're fairly bullet-proof and sail well. You can also get them for a very decent price and in good shape if you're willing to look carefully. Not very many CS 27's here on the West Coast. Also, didn't like the outboard rudder - for one thing, how do you convert to wheel steering if you want to? True, it's a well-made, good sailing boat, but just not a lot of them out here (and would cost $5K to ship one from the East). Ditto the Ericson 28: a VERY nice boat, but can't find one out here. (Lots of E27's, which are COMPLETELY different - very slow!) OTOH, you Easterners (and US) are devoid of the Venerable Crown 28 - an exellent boat built here in North Van. druid http://www.bcboatnet.org |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
25 foot umiak | General | |||
foot in mouth | ASA | |||
Expense per foot | Boat Building | |||
30 to 35-foot boats, days used? | ASA | |||
FS: 7 foot oars in NY | Marketplace |