Home |
Search |
Today's Posts |
|
#1
posted to rec.boats.cruising
|
|||
|
|||
Propeller anti-fouling?
"Vic Smith" wrote in message news On Mon, 18 Jan 2010 18:38:26 +0700, Bruce In Bangkok wrote: Has anyone tried any of the anti-fouling schemes intended for propellers, and if so what was your experience? The question comes about because I just had to dive on my prop and clean it. When I got down there I discovered a mass of "clams" as big as a bushel basket. Took two days to scrape them all off. True, for one reason or another, the boat hasn't moved in the better part of a year but still I don't believe I have ever seen as much growth. Must be either global warming or high CO2 content :-) In any event, it does make one think "there must be a better way". Haven't tried it because I don't have a boat. But you made me think that if you knew your boat would be idle a long time, wrapping the prop it in a old piece of poly tarp might work. Maybe even a thick black garbage bag. Should be easier to put that on and crack/cut it away than spend 2 days scraping. Barnacles need some light to grow, right? We sometimes want a patch of lawn for garden and the easiest way to kill the grass is to lay something on it that blocks the light. --Vic You're right, that does work Vic. The owner just has to remember to take it off before getting underway! Hope you're well and staying warm. |
#2
posted to rec.boats.cruising
|
|||
|
|||
Propeller anti-fouling?
Is it possible that there is too much electrolisis loss? And these barnicals
are attracted to that? Using anodes or disconnecting battery or another form of cathodic protection. Have a look at some other boats in the slips to see if theirs has the same problems. If they don't then you may have a electrolisis issue as the prop is the most obvious spot of focus for this as it is the thinest/best part under the water for transfer of electrons. "mmc" wrote in message g.com... "Vic Smith" wrote in message news On Mon, 18 Jan 2010 18:38:26 +0700, Bruce In Bangkok wrote: Has anyone tried any of the anti-fouling schemes intended for propellers, and if so what was your experience? The question comes about because I just had to dive on my prop and clean it. When I got down there I discovered a mass of "clams" as big as a bushel basket. Took two days to scrape them all off. True, for one reason or another, the boat hasn't moved in the better part of a year but still I don't believe I have ever seen as much growth. Must be either global warming or high CO2 content :-) In any event, it does make one think "there must be a better way". Haven't tried it because I don't have a boat. But you made me think that if you knew your boat would be idle a long time, wrapping the prop it in a old piece of poly tarp might work. Maybe even a thick black garbage bag. Should be easier to put that on and crack/cut it away than spend 2 days scraping. Barnacles need some light to grow, right? We sometimes want a patch of lawn for garden and the easiest way to kill the grass is to lay something on it that blocks the light. --Vic You're right, that does work Vic. The owner just has to remember to take it off before getting underway! Hope you're well and staying warm. |
#3
posted to rec.boats.cruising
|
|||
|
|||
Propeller anti-fouling?
On Mon, 18 Jan 2010 09:55:14 -0500, " Tuuk" wrote:
Is it possible that there is too much electrolisis loss? And these barnicals are attracted to that? Using anodes or disconnecting battery or another form of cathodic protection. Have a look at some other boats in the slips to see if theirs has the same problems. If they don't then you may have a electrolisis issue as the prop is the most obvious spot of focus for this as it is the thinest/best part under the water for transfer of electrons. Cathodic protection is exactly the same as it has been for the past 15 years or so. The propeller and shaft are insulated from the rest of the boat and an anode is placed between the prop and the stern bearing. "mmc" wrote in message ng.com... "Vic Smith" wrote in message news On Mon, 18 Jan 2010 18:38:26 +0700, Bruce In Bangkok wrote: Has anyone tried any of the anti-fouling schemes intended for propellers, and if so what was your experience? The question comes about because I just had to dive on my prop and clean it. When I got down there I discovered a mass of "clams" as big as a bushel basket. Took two days to scrape them all off. True, for one reason or another, the boat hasn't moved in the better part of a year but still I don't believe I have ever seen as much growth. Must be either global warming or high CO2 content :-) In any event, it does make one think "there must be a better way". Haven't tried it because I don't have a boat. But you made me think that if you knew your boat would be idle a long time, wrapping the prop it in a old piece of poly tarp might work. Maybe even a thick black garbage bag. Should be easier to put that on and crack/cut it away than spend 2 days scraping. Barnacles need some light to grow, right? We sometimes want a patch of lawn for garden and the easiest way to kill the grass is to lay something on it that blocks the light. --Vic You're right, that does work Vic. The owner just has to remember to take it off before getting underway! Hope you're well and staying warm. Cheers, Bruce (bruceinbangkokatgmaildotcom) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anti fouling paint | Cruising | |||
anti-fouling paste | General | |||
Aluminum bottom anti fouling | Boat Building | |||
Anti-Fouling | Cruising | |||
Anti-fouling | General |