Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
As a former owner of a CT-41, I can only say that this is the most
ridiculous statement I've read here, not directly attributable to JAX. Yes, some CT/Formosas were finished poorly. At worst, this means judging each and every boat individually. Dryrot problems in the deckhouse and other plywood structures (including the deck) are not at all uncommon, but a good many of them have been properly repaired (or even entirely rebuilt) over the years, and can be in very good condition indeed. The standing rigging on virtually all of them would have been replaced over the years (replacement of running rigging is a given) , and chainplates that were going to fail would have demonstrated this problem long ago and been replaced. Even assuming the chainplates need complete replacement, it is not a particularly costly or difficult task. As for electrical and plumbing systems, *any* boat which is 30-40 years old is a good candidate for improvements and upgrades to those systems if it hasn't already been done. Those boats should also be priced accordingly. But this has no bearing whatsoever on the overall seaworthiness or seakindliness of the CT/Formosa class of boats. The hulls are excellent -- *particularly* for blue-water cruising. I will grant that the tanks may well need replacement -- MAY. I would not state off-hand that such a statement can be applied to ALL of these boats. In short, any of the Taiwan boats MAY be perfectly serviceable -- a thorough and proper marine survey should weed-out those which require more work than the buyer is willing to take on. -- Karin Conover-Lewis Fair and Balanced since 1959 klc dot lewis at centurytel dot net "Ace-high" wrote in message ... There are any number of good to excellent Taiwan sailboats in the 45-55' size. I've owned my current 52' boat for 17 years (US built) but I almost bought a new CT-49 or Tayana 52 directly from the builders in Taiwan instead of buying a used boat. The short answer is - no I have nothing against heavy boats. Mine is fairly heavy at 42K pounds but on a 46' waterline. The problem with the Vagabond 47 & cousins etc and some poorly built Cheoy Lee's as well is that they were - guess - poorly built - as in wired, plumbed, chainplated, sparred, rigged, tanks, decks - that's what poorly built means - not just lots of wood and satin varnish. How do I know - 9 years of cruising and 18 years of talking to cruisers. These boats are best left as liveaboards in marinas and taken no further than VHF to USCG range offshore. On Tue, 15 Jun 2004 13:14:58 GMT, Dan Best wrote: Could you be a little more specific? I don't know anything about the Formosa 51, but have been aboard a couple of Vagabonds (though I like the Vagabond 42 better than the 47) and felt that they were fairly well made. Is your disgust with them a dislike of all heavy displacement cruising sailboats or is it something specific to these particular boats? Thanks - Dan Ace-high wrote: They're all total crap - the worst of the worst Taiwan leaky teaky's - buy something better. For Taiwan cheap boats - maybe a CT49 - not the crappy CT41's. You obviously haven't looked enough and learned enough. What do you own now and what have you owned before? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Sizing Hydraulic Rams | Boat Building | |||
FS: Force 10 Cozy Cabin Heater w/ heat exchanger | General | |||
FS: Force 10 Cozy Cabin Heater w/ heat exchanger | Cruising |