Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
"wemfish" (wemfish AT tiscali.co.uk) writes:
I will probably end up using a CAD program from a binary NG (for free) and use it to design my own boat. I was simply asking for a few lines as a guide to start from. if my plan is then of use to anyone else I will pass it to them for nothing. . . for plywood construction teh Carslon program (www.carlsondesign.com) has example files for quite a few small boats. if you interested in a simple flat bottom skiff or dory type you can use the free Basic program in the Boats section of my website to try different dimensions and get a table of offsets to start with in graphics CAD programs. (dories don't sail very well because of the extreme curvature along the chines.) -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
#3
![]() |
|||
|
|||
![]()
steveb ) writes:
(William R. Watt) freed themself from bondage, long enough to scribble: (dories don't sail very well because of the extreme curvature along the chines.) Is this true of the larger dories ... 34 to 37 ft Benford designs, for example? sorry, I don't know. I've read there is to much weather helm in dories. I'm sure that would depend on the radius of curvature of the side. Longer boats with greater length-to-beam ratio would not have as much curvature. I don't know how they get the beaminess or draft to carry sail without excessive heeling - fill them to the gunwales with fish for ballast? -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
#4
![]() |
|||
|
|||
![]()
steveb wrote in message . ..
(William R. Watt) freed themself from bondage, long enough to scribble: (dories don't sail very well because of the extreme curvature along the chines.) Is this true of the larger dories ... 34 to 37 ft Benford designs, for example? steveb In my opinion, it was and is a wrong headed assumption. Dories with extreme curvature at the chines may not sail well, but there are plenty of Dories that do not have this characteristic. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
OT Hanoi John Kerry | General | |||
Where to find ramp stories? | General | |||
Dealing with a boat fire, checking for a common cause | General | |||
The best laid plans... we'd ignore -- a boat buyer's story | General | |||
Repost from Merc group | General |