Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
hehe.... cool.
I once dove for a very expensive bronze prop in the North Atlantic in late April. (Portsmouth Harbor - NH) The boat owners treated myself and my wife to *fine* lobster dinner after I actually came up with it on the 5th dive off the town warf. What I never told them is that I was in the last 4 seconds of the last try when I saw it. After 5 minutes in - I was too cold for a dive #6, as it was it took me about 45 minutes to warm up enough to be comfortable sitting and doing "dining stuff". When you first dive in, it feels like needles..... then if you let "target fixation" take over, you can enjoy 5 minutes or so of "comfortably numb" before signs of hypothermia set in. It was one of those "human limits" experiences that I actually treasure. I wonder if I'd feel that way if I failed to find the prop? -W "Gary Warner" wrote in message ... So we decided to go out for a short day of boating. Put into the Hudson River at the Ramp in Hudson NY. Headed North for about an hour and stopped at what turned out to be a private marina. A boat owner there told us there was a decent restaurant about another 20 to 30 minutes upriver, so we went. When we get to the restaurant/marina I'm driving. I circle around about 4 times deciding where the best place to dock is. A guy on the dock notices my circling and pobably thinks I'm worried about docking. So as I approach a the finger pier of my choice he's there waiting to help us. Nice. I have a good approach and am coming in at just about the right angle and speed. I decided to give it just a little reverse thrust to slow things down. A moment later I decided we're just a liiiiite to far from the dock and I'd like to give it a jab forward to kick the bow a little closer. So I put it in gear - but feel no thrust in the boat. I give a little more gas and do it again. Still no thrust. By now we've floated gently close enough, a rope is thrown to the gentleman on the dock, and my brother get off the stern and ties us up. At this point only I really know anything is wrong. I open the engine cover and my Dad says, "Hey, there's quite a lot of water coming in there. More then ususal." Turns out the prop shaft has come loose from it's coupling to the engine and has dropped down stem-log tube!! A moments thought and we realize the water coming in is not really that much and the pumps will be able to keep up easily for a long time. We stuff a sock into the hole anyway to slow the flow. Next I realize someone will have to go into that cold water to figure out if the shaft is anywhere to be found. I get into a bathing suit and lower myself in. Some people on another boat are, I'm told later, looking at my like I'm crazy. Turns out the shaft & prop is still there. I forgot, but the shaft can't slide past the rudder with the prop on it. I push a few times on the shaft but is doesn't appear inside the hull. Then my brother reminds me that it's keyed and I should slowly turn it while pushing. Sure enought after about a 1/4 turn is slides in. We tightend up the three set screws and gave it a little test but something doesn't seem quite right. We loosen the screws and run it in FORWARD to put more pressure on the prop & shaft. After all, I was only pushing it in there while in the water with nothing to hold to. Now we tighten up the set-screws and it seems much better. Drove her the 1.5 hours back South with no problems. (Oh, somewhere in there - after the swim but before the set-screw tests - we had a nice lunch.) Overall a good fun day of boating with a litle story, a lesson learned (Keep those set screws tight) and no serious problems. See Ya, Gary |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Formosa 51 / Hudson Force 50 / Vagabond 47 | Cruising | |||
Swim Ladder | Cruising | |||
AD : New / Custom Swim Platforms in NC | General | |||
Mounting outboard on swim platform question | General | |||
Swim and kayak race in Yonkers. NY Aug 24th 2003 | Touring |