| Home |
| Search |
| Today's Posts |
|
#2
posted to rec.boats.electronics
|
|||
|
|||
Erosion of the Zinc anode and HF transmission via PacTOR modemand Sailmail
Bil wrote:
After checking my zinc anode, I'm fairly certain I'm getting accelerated erosion of my shaft zinc anode when transmitting Sailmail e-mail via my HF radio and PacTOR modem. Sailmail and the PacTOR modem drive the HF radio (an ICOM IC-M710) fairly hard. Does everyone transmitting with a PacTOR modem suffer accelerated erosion of their zinc anodes? Or is this something specific to my installation (and can be corrected)? If the latter, what should I look for and correct? Cheers Bil How is your rf ground set up? Gordon |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pactor USB modem - advice | Cruising | |||
| Pactor modem | Cruising | |||
| Pactor Modem installation | Cruising | |||
| Trim Tab anode? | General | |||
| FS: SCS PTC-IIe PACTOR MODE MODEM | Electronics | |||
Threaded Mode
