Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Serious boat stuff is done in PACTOR for email and similar or good old SSB
for position stuff or various nets. The email systems are actually pretty sophisticated and involve a lot more than Pactor. But Pactor is pretty well required. I see But is it correct that pactor is a proprietary format? |
#2
![]() |
|||
|
|||
![]()
wrote in message
... Serious boat stuff is done in PACTOR for email and similar or good old SSB for position stuff or various nets. The email systems are actually pretty sophisticated and involve a lot more than Pactor. But Pactor is pretty well required. I see But is it correct that pactor is a proprietary format? Proprietary inasmuch as only SCS makes TNCs for it. PACTOR I is available on many TNCs but PACTOR II and III are only available via the SCS TNCs. Doug, k3qt s/v Callista |
#3
![]() |
|||
|
|||
![]()
Proprietary inasmuch as only SCS makes TNCs for it. PACTOR I is available
on many TNCs but PACTOR II and III are only available via the SCS TNCs. Is it worth having equip that uses Pactor 2 and 3? |
#4
![]() |
|||
|
|||
![]()
Absolutely! I know that Winlink has stopped supporting PACTOR I and I
suspect that Sailmail has too or will soon. PACTOR I is 100 bits per second. PACTOR-II is 200 bits per second. PACTOR III can go much higher and is adaptive. I generally connectd at around 3400 BPS but it can go a bit higher with a really good signal. Doug wrote in message ... Proprietary inasmuch as only SCS makes TNCs for it. PACTOR I is available on many TNCs but PACTOR II and III are only available via the SCS TNCs. Is it worth having equip that uses Pactor 2 and 3? |
#5
![]() |
|||
|
|||
![]() Is it worth having equip that uses Pactor 2 and 3? Absolutely! PACTOR III can go much higher and is adaptive. I Well then this begs the question should I go straight for Pactor 3 and forget abt Pactor 2 even? |
#6
![]() |
|||
|
|||
![]() wrote in message ... Is it worth having equip that uses Pactor 2 and 3? Absolutely! PACTOR III can go much higher and is adaptive. I Well then this begs the question should I go straight for Pactor 3 and forget abt Pactor 2 even? I would. You can't actually forget about PACTOR II. All connections to Winlink (and I believe Sailmail now) are made using PACTOR II. Once established, it switches to PACTOR III assuming it has determined that the other end is PACTOR III capable. If you want to be able to dowload weatherfax product and such you really want PACTOR III. Other users appreciate it as well since you will spend alot less time on the air. Doug |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Modifying Icom IC-M800 | Electronics | |||
RDF for newbies and NN of KN | ASA | |||
VANISHED (stolen?)- a new (and unique) 57' Beneteau | Cruising |