Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2007
Posts: 270
Default Cape Horn WV info

On Sat, 10 May 2008 14:22:24 -0500, Brian Whatcott
wrote:


There's a board used in aircraft still - been round for ever, that
looks like SRBP (synthetic resin bonded paper) that is called SRBF
where the fabric layers are made of linen. It's used for cable
fairleads. It turns out it has an unexpected property - it is durable
against frictional wear because it is self-lubricating. Who would have
guessed?

When I have proposed high density polyethylene for similar purposes
I have heard something like "we KNOW this works, how long does HDPE
last?". You can buy HDPE cutting boards at Walmart for peanuts -
and SRBF is expensive and hard to gert any more, But the Cape Horn
plastic bush story make this jump right back to mind!
(Nylon swells and weakens I believe?)

Brian Whatcott Altus OK


FWIW - my experience

Nylon should not be used for underwater or near water bushings as it
has a tendancy to swell and thus tighten on the shaft.

I had the bottom and top bushing for my rudder made of HDPE and they
are still going strong - no swelling, no wear, no friction after 15
years in the water. It is the modern lignum vitae (sp?)

So far as I am concerned, the stuff is magic. You can drill it, saw
it, file and chisel it and can thus make a myriad of thing about the
boat. It is also cheap and readily available I find that the most
useful is an offcut slab of 20mm (0.75") which I was given from a
waste offcuts bin.

In addition to the inflatable I have a hard GRP 9' 6" dinghy which
breaks into two nesting halfs. In Australia I had to change the wooden
keel rubbing strake sometimes 6 monthly as nothing seemed to resist
the worms' boring activity, the dinghy being almost permanently in the
water. I tried Iron Bark and most other suggestions from the old
hands. I through bolted a length of HDPE to both halves and it is
still going stronge, sharp coral has no effect and even the barnacles
do not attach to it. Fantastic stuff.

The homeware shops and supermarkets sell breadboards which vary in
thickness from 2mm to about 12mm (0.5"). This stuff does not seem as
dense as the industrial HDPE I have but it comes in very useful as
washers, packers, shims, and anything else requiring a hard, cutable
inert and non-conductive material. I always carry a couple of
different sizes on board now.

regards
Peter
  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2007
Posts: 270
Default Cape Horn WV info

On Sun, 11 May 2008 06:56:43 +1000, Herodotus
wrote:

Why is it that when I post to this newsgroup or write a hurriedly
email, I make so many bloody typos? When I type a report or such I
don't.
Damned annoying


FWIW - my experience

Nylon should not be used for underwater or near water bushings as it
has a tendancy to swell and thus tighten on the shaft.

I had the bottom and top bushing for my rudder made of HDPE and they
are still going strong - no swelling, no wear, no friction after 15
years in the water. It is the modern lignum vitae (sp?)

So far as I am concerned, the stuff is magic. You can drill it, saw
it, file and chisel it and can thus make a myriad of thing about the
boat. It is also cheap and readily available I find that the most
useful is an offcut slab of 20mm (0.75") which I was given from a
waste offcuts bin.

In addition to the inflatable I have a hard GRP 9' 6" dinghy which
breaks into two nesting halfs. In Australia I had to change the wooden
keel rubbing strake sometimes 6 monthly as nothing seemed to resist
the worms' boring activity, the dinghy being almost permanently in the
water. I tried Iron Bark and most other suggestions from the old
hands. I through bolted a length of HDPE to both halves and it is
still going stronge, sharp coral has no effect and even the barnacles
do not attach to it. Fantastic stuff.

The homeware shops and supermarkets sell breadboards which vary in
thickness from 2mm to about 12mm (0.5"). This stuff does not seem as
dense as the industrial HDPE I have but it comes in very useful as
washers, packers, shims, and anything else requiring a hard, cutable
inert and non-conductive material. I always carry a couple of
different sizes on board now.

regards
Peter

  #3   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 257
Default Cape Horn WV info

On Sun, 11 May 2008 07:13:09 +1000, Herodotus
wrote:

On Sun, 11 May 2008 06:56:43 +1000, Herodotus
wrote:

Why is it that when I post to this newsgroup or write a hurriedly
email, I make so many bloody typos? When I type a report or such I
don't.
Damned annoying

It is all that Greek coffee. Makes you hands shake and you miss the
keys :-)


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)
  #4   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2007
Posts: 270
Default Cape Horn WV info

On Sun, 11 May 2008 13:24:49 +0700, Bruce in Bangkok
wrote:

On Sun, 11 May 2008 07:13:09 +1000, Herodotus
wrote:

On Sun, 11 May 2008 06:56:43 +1000, Herodotus
wrote:

Why is it that when I post to this newsgroup or write a hurriedly
email, I make so many bloody typos? When I type a report or such I
don't.
Damned annoying

It is all that Greek coffee. Makes you hands shake and you miss the
keys :-)


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


No Bruce,
It's just the thoughts of all those beautiful Thai maidens.

Coupled with the uncontrollable drooling and dribbling it can be quite
embarrassing.

cheers
Peter
  #5   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 257
Default Cape Horn WV info

On Sun, 11 May 2008 19:31:22 +1000, Herodotus
wrote:

On Sun, 11 May 2008 13:24:49 +0700, Bruce in Bangkok
wrote:

On Sun, 11 May 2008 07:13:09 +1000, Herodotus
wrote:

On Sun, 11 May 2008 06:56:43 +1000, Herodotus
wrote:

Why is it that when I post to this newsgroup or write a hurriedly
email, I make so many bloody typos? When I type a report or such I
don't.
Damned annoying

It is all that Greek coffee. Makes you hands shake and you miss the
keys :-)


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


No Bruce,
It's just the thoughts of all those beautiful Thai maidens.

Coupled with the uncontrollable drooling and dribbling it can be quite
embarrassing.

cheers
Peter


Hey, we got some of them, you can have up to four of. No problem, just
be sure that you provide for them all equally, in all senses of the
word. (Which may make your hands shake even more).


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


  #6   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2007
Posts: 270
Default Cape Horn WV info

On Sun, 11 May 2008 17:18:24 +0700, Bruce in Bangkok
wrote:


No Bruce,
It's just the thoughts of all those beautiful Thai maidens.

Coupled with the uncontrollable drooling and dribbling it can be quite
embarrassing.

cheers
Peter


Hey, we got some of them, you can have up to four of. No problem, just
be sure that you provide for them all equally, in all senses of the
word. (Which may make your hands shake even more).


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


Yeah, sure.

I am both sadly and yet gratefully coming to the end of a 33 year
marriage to only one woman.

As for Moslems being able to have four wives, I would mind you of one
of my favourite Englishman's comments

"The definition of bigamy is having one wife too many;
- monogamy is the same thing" - Oscar Wilde.

Besides, religions aside, many of the Americans I have met whilst
cruising are well on their way to having four wives, perhaps not more
than one at a time but a considerable number of the cruising couples I
have met are into their second or third marriages. I even met one man
who had remarried his first wife after two in between. I am aways
amused when i hear couples talk of "xxx's daughter came to stay"

No, I am seriously considering 'hieing me to a monastery" or going gay
without the sex. A lot of men I know are simply so easy to get along
with. But.... there are a lot of gorgeous Thai women. Come to think
of it, there are a lot of attractive women. My problem is that I am
looking for the perfect woman. I found one once but she wasn't
remotely interested in me. She was looking for the perfect man.

No. I think I'll just stick with my six beautiful kids. There are no
conditions and expiry date to a child's love and I have learned the
hard way the truth of my Malay friend's advice that "pretty women are
high maintenance".

Look after yourself and be careful of the seditious "un-American"
statements you have been making of late. They don't allow visitors at
Guantanamo Bay and there are no lovely Thai women.

cheers
Peter
  #7   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 257
Default Cape Horn WV info

On Sun, 11 May 2008 21:15:29 +1000, Herodotus
wrote:

On Sun, 11 May 2008 17:18:24 +0700, Bruce in Bangkok
wrote:


No Bruce,
It's just the thoughts of all those beautiful Thai maidens.

Coupled with the uncontrollable drooling and dribbling it can be quite
embarrassing.

cheers
Peter


Hey, we got some of them, you can have up to four of. No problem, just
be sure that you provide for them all equally, in all senses of the
word. (Which may make your hands shake even more).


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


Yeah, sure.

I am both sadly and yet gratefully coming to the end of a 33 year
marriage to only one woman.

As for Moslems being able to have four wives, I would mind you of one
of my favourite Englishman's comments

"The definition of bigamy is having one wife too many;
- monogamy is the same thing" - Oscar Wilde.

Besides, religions aside, many of the Americans I have met whilst
cruising are well on their way to having four wives, perhaps not more
than one at a time but a considerable number of the cruising couples I
have met are into their second or third marriages. I even met one man
who had remarried his first wife after two in between. I am aways
amused when i hear couples talk of "xxx's daughter came to stay"

No, I am seriously considering 'hieing me to a monastery" or going gay
without the sex. A lot of men I know are simply so easy to get along
with. But.... there are a lot of gorgeous Thai women. Come to think
of it, there are a lot of attractive women. My problem is that I am
looking for the perfect woman. I found one once but she wasn't
remotely interested in me. She was looking for the perfect man.

No. I think I'll just stick with my six beautiful kids. There are no
conditions and expiry date to a child's love and I have learned the
hard way the truth of my Malay friend's advice that "pretty women are
high maintenance".

Look after yourself and be careful of the seditious "un-American"
statements you have been making of late. They don't allow visitors at
Guantanamo Bay and there are no lovely Thai women.
cheers
Peter


Huh? Greek coffee is seditious? God only knows, but it may be in this
day and age.

By the way, there is a bloke down the dock that seems to have sorted
out his marital arrangements. He owns a generic medicine factory in
Russia and is married to a Russian woman. Charley is in his early
sixties and has decided to turn the factory over to his younger wife
to manage. So Charley cruises the world on his 45 ft. Amel and his
wife stays home and runs the business and sends Charley money. She
visits wherever Charley happens to be on her annual vacation and they
seem to get along wonderfully well.

It looks like a great idea, but as they say, "The devil is in the
details", and I haven't gotten those worked out yet.


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)
  #8   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 94
Default Cape Horn WV info

An old sailor song .. from days of yor .. or is that whore .. whatever..


You wanna be happy for the rest of your life,
Never make a pretty woman your wife,
From my personal point of view, get an ugly girl to marry you.

If you wanna be happy for the rest of your life,
Never make a pretty woman your wife, no,
From my personal point of view, get an ugly girl to marry you.


A pretty woman makes her husband look small
And very often causes his downfall.

When out sailing a boat, an ugly woman will
keep you afloast;
The pretty ones are good in bed, but they
can't set sails, and they will get you dead.

An ugly woman cooks meals on time,
She'll always give you peace of mind.
She can raise the sails, dump the pales,
and she don't care if the head smells like snails.

From my personal point of view, get an ugly girl to marry you.
If you wanna be happy for the rest of your life,
Never make a pretty woman your wife,
From my personal point of view, get an ugly girl to marry you.
If you wanna be happy for the rest of your life,



"Herodotus" wrote in message
...
On Sun, 11 May 2008 17:18:24 +0700, Bruce in Bangkok
wrote:


No Bruce,
It's just the thoughts of all those beautiful Thai maidens.

Coupled with the uncontrollable drooling and dribbling it can be quite
embarrassing.

cheers
Peter


Hey, we got some of them, you can have up to four of. No problem, just
be sure that you provide for them all equally, in all senses of the
word. (Which may make your hands shake even more).


Bruce-in-Bangkok
(correct Address is bpaige125atgmaildotcom)


Yeah, sure.

I am both sadly and yet gratefully coming to the end of a 33 year
marriage to only one woman.

As for Moslems being able to have four wives, I would mind you of one
of my favourite Englishman's comments

"The definition of bigamy is having one wife too many;
- monogamy is the same thing" - Oscar Wilde.

Besides, religions aside, many of the Americans I have met whilst
cruising are well on their way to having four wives, perhaps not more
than one at a time but a considerable number of the cruising couples I
have met are into their second or third marriages. I even met one man
who had remarried his first wife after two in between. I am aways
amused when i hear couples talk of "xxx's daughter came to stay"

No, I am seriously considering 'hieing me to a monastery" or going gay
without the sex. A lot of men I know are simply so easy to get along
with. But.... there are a lot of gorgeous Thai women. Come to think
of it, there are a lot of attractive women. My problem is that I am
looking for the perfect woman. I found one once but she wasn't
remotely interested in me. She was looking for the perfect man.

No. I think I'll just stick with my six beautiful kids. There are no
conditions and expiry date to a child's love and I have learned the
hard way the truth of my Malay friend's advice that "pretty women are
high maintenance".

Look after yourself and be careful of the seditious "un-American"
statements you have been making of late. They don't allow visitors at
Guantanamo Bay and there are no lovely Thai women.

cheers
Peter



  #9   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,239
Default Cape Horn WV info

On 2008-05-11 07:15:29 -0400, Herodotus said:

As for Moslems being able to have four wives, I would mind you of one
of my favourite Englishman's comments

"The definition of bigamy is having one wife too many;
- monogamy is the same thing" - Oscar Wilde.


Or one that' been attributed to the Chinese ideogram for "trouble" --
two women under one roof.

--
Jere Lull
Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD
Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/
Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cape Horn wind steering Gordon Cruising 2 November 3rd 06 06:38 PM
Who did I see rounding Cape Horn on January 23? Frank Wilson Cruising 1 February 6th 06 09:59 AM
Anyone got any video of Cape Horn? John the Baptist Jr. ASA 12 January 18th 06 05:44 PM
My new Cape Horn sailing/teambuilding book HaulAwayRob Cruising 0 September 15th 05 04:25 PM
I want to Try on a WS Cape Horn C Mark Blatchley Touring 1 August 9th 04 04:09 AM


All times are GMT +1. The time now is 03:42 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017