Home |
Search |
Today's Posts |
#10
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
BajaJim wrote:
MANY Thanks to Richard Kinch and Bryan Combs for some great replies, it was clear that they understood I am only going down 6 to 8 feet and just need a little compressor, similar to those used for small paint sprayers. I will also have 30A dock service to plug into. This was my first post and participation and, while I love a little humor as much as the next guy (see my book The Baja Bash), it was a little hard finding the worthwhile posts while sifting through others from people who clearly feel a need to reply to anything and everything, under the assumption that they know all and should therefore pass on their pearls of wisdom. Jim, I believe that the warnings you received about "oil" based compressors are based on the concern that you might be exposing yourself to what are admittedly small amounts of toxins but over long periods of time, all while working underwater - an environment where one would like to avoid encountering breathing issues. To compound this further you will be most likely be exerting yourself enough to raise your respiration rate which would increase any toxin absorption rate. Also, because of the "partial pressures" of breathing gases in increased atmospheres, the percentage of toxin absorbed by your body goes up dramatically as you go deeper. If you can avoid using an oil based compressor I would strongly suggest doing so, especially since inexpensive alternatives exist. Cheers, Robb |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cleaning the hull | Cruising | |||
Handy 35s5 Cleaning Tips | ASA | |||
Mouldy Old Boats and cleaning tip request! | General | |||
Cleaning Fiberglass | General | |||
Cleaning Fiberglass | Cruising |