Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Peggie Hall
 
Posts: n/a
Default Head and Sink Drain

Horace Brownbag wrote:
My center cockpit ketch had the aft sink plumbed 10 feet to a tee in
the cockpit drain. The head (MSD, blah, blah, blah) was plumbed to
the through hull directly under the aft sink.

Now, I'm trying to connect these back up...

I've a bit of a problem running the sink drain to the cockpit drain
through hull.

I think I should have a problem teeing the sink into the head through
hull....


Why? It's a great idea! In fact, several sailboat builders plumb them
that way to save a through-hull. There's also another advantage--the
ability to use the sink to flush seawater out of the whole system before
it can sit and stagnate (or after it has)...just close the seacock, fill
the sink with clean fresh water...flush. Because the thru-hull is
closed, the toilet will pull the water out of the sink, rinsing out the
intake hose and channel in the rim of the bowl as well as the discharge
hose...something that just pouring water into the bowl can't do. It does
require keeping the sink plugged when not in use, though...otherwise the
toilet will pull air through the sink, preventing the pump from priming.

I figured somebody
here would have an opinion....


Yup.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1

  #2   Report Post  
Horace Brownbag
 
Posts: n/a
Default Head and Sink Drain

On Tue, 22 Jun 2004 04:07:58 GMT, Peggie Hall
wrote:

Horace Brownbag wrote:
My center cockpit ketch had the aft sink plumbed 10 feet to a tee in
the cockpit drain. The head (MSD, blah, blah, blah) was plumbed to
the through hull directly under the aft sink.

Now, I'm trying to connect these back up...

I've a bit of a problem running the sink drain to the cockpit drain
through hull.

I think I should have a problem teeing the sink into the head through
hull....


Why? It's a great idea! In fact, several sailboat builders plumb them
that way to save a through-hull. There's also another advantage--the
ability to use the sink to flush seawater out of the whole system before
it can sit and stagnate (or after it has)...just close the seacock, fill
the sink with clean fresh water...flush. Because the thru-hull is
closed, the toilet will pull the water out of the sink, rinsing out the
intake hose and channel in the rim of the bowl as well as the discharge
hose...something that just pouring water into the bowl can't do. It does
require keeping the sink plugged when not in use, though...otherwise the
toilet will pull air through the sink, preventing the pump from priming.

I figured somebody
here would have an opinion....


Yup.


....oh, sorry, I should have been a bit more specific.. These are
drains.

Teeing the gray water from the sink, and the black water from the
head.

If the seacock were closed, and the Y valve was the wrong way, black
water would go up the sink drain.

I'd rather not do this, ...I mean, I can keep the valves turned the
right way, but it reminds me of a chicken's vent....but I'd, also,
would like to keep the cockpit drain as a cockpit drain only.

It's coming to the point where I cannot hem or haw anymore....
  #3   Report Post  
Peggie Hall
 
Posts: n/a
Default Head and Sink Drain

Horace Brownbag wrote:
...oh, sorry, I should have been a bit more specific.. These are
both drains.


Ohhh...I thought you meant the head INTAKE and sink drain.

Then no, that won't work. Nor would I recommend flushing the toilet out
a cockpit drain either...that the builder may have designed it that
way is only one more example of how little thought is given to onboard
waste management.

How many thru-hulls do you have for the head INTAKE and sink drain?

If there's one for each, you could combine the sink drain with one of
'em, and enlarge the other to accomodate a 1.5" head discharge...or you
could drain the sink into a sump (if there are any) instead of directly
overboard, and enlarge that thru-hull for the head discharge.

Unless the boat has a holding tank, those are the only two ways I can
think of that make any sense to have only two thru-hulls for both the
sink drain and the toilet.


--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Low maintenance head jimthom Boat Building 0 May 17th 04 08:32 AM
Water systems on my boat - need suggestions, please. Adam Cruising 14 May 11th 04 04:56 PM
Water systems on my boat - need suggestions, please. Adam Boat Building 10 May 10th 04 03:53 PM
Recommendation for New Marine Head Drumm Law Cruising 10 April 13th 04 04:14 PM
Where to find ramp stories? designo General 15 December 9th 03 08:57 PM


All times are GMT +1. The time now is 05:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017