I've heard a lot of good stuff about TDS' stuff. I've used 3M's product as
well with good success. Can't remember the number, but it's labeled "teak
deck seam/sealer" or something obvious like that.

"Glenn Ashmore" wrote in message
newsC2Bb.90342$xV6.61520@lakeread04...
Rutu' teak decking will have about 1,100 lineal feet of seams. Based on
the manufacturers' coverage figures that will require 4 gallons or 60
cartriges of caulk.

The candidates with estimated cost for Rutu's decks a
Detco - 2 part polysulfide & primer + cartriges - $580
Boatlife - 2 part Polysulfide & primer + cartriges $540
Maritime Wood Products - one part oxime silicone - $510
Teak Decking Systems SIS 440 - one part silicone - $450

I am leaning strongly towards the silicones because there is no mixing
or cartrige filling and you can stop at the end of a cartrige without
wasting the rest of the gallon. Both silicones seem to be highly
recommended with the TDS product getting the most mentions.

Does anyone have experience with either?

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com