HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!

John Boatright wrote:
HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!

I've ordered from Raka and found the Raka #127 resin and #350 no-blush
hardener ideal for clear-coating fiberglass. It's a less-viscious,
softer epoxy that some others. Most similar to MAS in my experience.
Quick shipping. Good prices.

John


John Caldeira
Dallas, Texas, USA
http://www.outdoorplace.org/

John Caldeira wrote:
John Boatright wrote:

HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!


I've ordered from Raka and found the Raka #127 resin and #350 no-blush
hardener ideal for clear-coating fiberglass. It's a less-viscious,
softer epoxy that some others. Most similar to MAS in my experience.
Quick shipping. Good prices.

I used Raka (for the most part) when I built an 11' skiff.. works very
nice. Once major difference between Raka and Mas (as I ended up getting
some Mas to finish up), out of the can viscosity of Raka is noticable
thinner, so I would definately prefer to use that as a first coat over
bare wood.

John,
I find RAKA's '3 gallon kit' to be the most economical for 'all around'
use/inventory. Since Larry equates everything to '1 quart' increments, it is
very easy to 'mix-n-match' the order to different 'combinations' of basic
resin & hardeners.

It is also very nice to have a 'kit' of his '5-Minute' stuff on hand. Not so
much for boatbuilding . . . it's done many a repair around the house, yard,
boats, etc.

Regards & Good Luck,
Ron Magen
Backyard Boatshop

"John Boatright" wrote in message
...
HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!

John Boatright wrote in message ...
HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!


I get my glue from Larry at Raka too! ...and he does not even spam me
later like ssoommeeeeeee distributors...
Scotty from SmallBoats.com

(Dave Wright) wrote in message om...
John Boatright wrote in message ...
HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!


I bought (2) 7.5 gallon System 3 fairing kits and 2 gallons of System
3 Primer from Advantage - four separate orders all together. The
products arrived promptly - 3 or 4 days (I live on the West Coast).
The total price for these System 3 products, including shipping, was
less than I could find elsewhere. Plus, I did not have to pay my
state's sales tax. The owner Brian Dixon tries to please. I
recommend him.

Dave Wright
Seattle, WA

Oh crap, Brian sells goo? I did not know that and I will check him
out, I have always liked his posts. And here I must note that
Advantage was not the company I was suggesting spams me either...
Sorry Bri, did not know that was you. Guess I gotta buy some goo from
you now... Scotty from SmallBoats.com

In article UJ54b.310119$uu5.65331@sccrnsc04, Brian D wrote:
Hey Scotty. Thanks for the support (yes, you too Dave). And no, I don't
spam. I once posted an advertisement here and the feedback was pretty
negative, so I withhold such activities. I figure products and service
speak for themselves and word gets around.

Brian

PS: How'd you find our site?
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Maybe not advertising enough 8-)

Dave
--

"Backyard Renegade" wrote in message
om...
(Dave Wright) wrote in message
om...
John Boatright wrote in message
...
HI!! Question has anyone ever ordered Epoxy from these places??
http://www.advantagecomposites.com/catalog/
http://www.Raka.com Thanks!!!


I bought (2) 7.5 gallon System 3 fairing kits and 2 gallons of System
3 Primer from Advantage - four separate orders all together. The
products arrived promptly - 3 or 4 days (I live on the West Coast).
The total price for these System 3 products, including shipping, was
less than I could find elsewhere. Plus, I did not have to pay my
state's sales tax. The owner Brian Dixon tries to please. I
recommend him.

Dave Wright
Seattle, WA

Oh crap, Brian sells goo? I did not know that and I will check him
out, I have always liked his posts. And here I must note that
Advantage was not the company I was suggesting spams me either...
Sorry Bri, did not know that was you. Guess I gotta buy some goo from
you now... Scotty from SmallBoats.com

================================================== =====
PAUL OMAN ----- Progressive Epoxy Polymers,
Inc.
Frog Pond Hollow - 48 Wildwood Dr - Pittsfield NH 03263
603-435-7199 FAX 603-435-7182
VISA/MC/Discover
http://www.epoxyproducts.com
Boating site: http://www.epoxyproducts.com/marine.html
================================================== ======

FGCI.com
Greg Sefton

FGCI is fine, but it is room-temperature only (60F or higher for proper
cure). Otherwise, it's fine.

Brian

--
My boat project: http://www.advantagecomposites.com/tongass


"Bray Haven" wrote in message
...
FGCI.com
Greg Sefton