Home |
Search |
Today's Posts |
#11
|
|||
|
|||
"Mungo Bulge" wrote:
Put this in your veneer press: Plywood substrate, wet out with epoxy, snapshots of friends and family, old newspaper clippings, etc. 6 oz fibreglass cloth, wet out with WEST SYSTEM 105 Resin and 207 Special Coating Hardener, cover with a sheet of Formica sprayed with mould release, When it cures, you will have a montage that is significant, and the texture of Formica all on a stable substrate. Don't use too much pressure, (10 psi) Just a thought. SFWIW, my head has glass laminated over plywood with epoxy, then shot with high build primer followed by 2 part LP. Clean up is with a sponge. Depending on the glass, you may or may not have to fair out the glass before shooting HBP. Lew |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The Epoxy Test Results | Cruising | |||
Bedding new fair-leads with epoxy | Boat Building | |||
UV Blocker for Epoxy | Boat Building | |||
formica trim finish technique. | Boat Building | |||
Will epoxy bond formica? | Boat Building |