Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
"Brian Nystrom" wrote in message ... Glenn Ashmore wrote: Do not paint before glassing. I think he was referring to doing a sealer coat of epoxy on the plywood prior to glassing. Your instructions indicate that you're assuming that he has done a sealer coat. I wouldn't want him to wash bare plywood with water and amonia. ;-) Good point. :-) To me paint is paint and epoxy is epoxy. (But that does not include "epoxy" paints.) -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fiberglassing over wood? | Boat Building | |||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1) | Boat Building |