Pagaie wrote:
... I'd like to have a final piece of advice from you
readers, the pros and cons of different fiberglassing approach and
tools.

I've done four hulls, all starting with glass over dry wood. The only
problem I've had was when I tried to wet out two layers of satin cloth,
cut on a bias and laid in different directions. I don't recommend
that, although I think my biggest problem was that it takes longer and
after 20 minutes of rolling the roller got sticky and I didn't switch
to a fresh roller. If you over squeegee, you can get foam in the
glass, so try to not over do it. I only use a brush for inside corners
where nothing else will reach.

Al