Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Pagaie wrote: ... I'd like to have a final piece of advice from you readers, the pros and cons of different fiberglassing approach and tools. I've done four hulls, all starting with glass over dry wood. The only problem I've had was when I tried to wet out two layers of satin cloth, cut on a bias and laid in different directions. I don't recommend that, although I think my biggest problem was that it takes longer and after 20 minutes of rolling the roller got sticky and I didn't switch to a fresh roller. If you over squeegee, you can get foam in the glass, so try to not over do it. I only use a brush for inside corners where nothing else will reach. Al |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fiberglassing over wood? | Boat Building | |||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1) | Boat Building |