Pump teflon? Riiiiiiight.

Cheers MC

Capt. Mooron wrote:

I don't know if that is really required. I use a standard stuffing box with
a grease nipple installed and pump Teflon into it. Even at 2500 rpm I'm
lucky to get a drip every minute or so. None gets through when the shaft is
not turning. I've removed the rudder and extracted the shaft to inspect for
wear last year... nothing. Once the shaft was wiped clean you couldn't even
tell where the stuffing box seal was located. The shaft has been installed
new since 1993.

CM

"Brian McAloon" wrote in message
. ..
| Has any gone to a dripless shaft seal from the drip type. Any
modifications
| need to be made to the shaft or opening or is it pretty simple.
|
|
| Brian McAloon
| S/V CLIODHNA M28 OI
| Pompano Beach, Florida.
|
|

Teflon grease.... my apologies for not taking your obvious lack of
intellect into consideration. I'll try harder next time to remind myself to
write at a level you can comprehend... ;-)

CM

"The_navigator©" wrote in message
...
| Pump teflon? Riiiiiiight.
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| I don't know if that is really required. I use a standard stuffing box
with
| a grease nipple installed and pump Teflon into it. Even at 2500 rpm I'm
| lucky to get a drip every minute or so. None gets through when the shaft
is
| not turning. I've removed the rudder and extracted the shaft to inspect
for
| wear last year... nothing. Once the shaft was wiped clean you couldn't
even
| tell where the stuffing box seal was located. The shaft has been
installed
| new since 1993.
|
| CM
|
| "Brian McAloon" wrote in message
| . ..
| | Has any gone to a dripless shaft seal from the drip type. Any
| modifications
| | need to be made to the shaft or opening or is it pretty simple.
| |
| |
| | Brian McAloon
| | S/V CLIODHNA M28 OI
| | Pompano Beach, Florida.
| |
| |
|
|
|

You mean teflon-containg grease -right? You don't think the grease is
made from teflon do ya? The imprecision in you words is matched only by
that of your thinking.

Cheers MC

Capt. Mooron wrote:

Teflon grease.... my apologies for not taking your obvious lack of
intellect into consideration. I'll try harder next time to remind myself to
write at a level you can comprehend... ;-)

CM

"The_navigator©" wrote in message
...
| Pump teflon? Riiiiiiight.
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| I don't know if that is really required. I use a standard stuffing box
with
| a grease nipple installed and pump Teflon into it. Even at 2500 rpm I'm
| lucky to get a drip every minute or so. None gets through when the shaft
is
| not turning. I've removed the rudder and extracted the shaft to inspect
for
| wear last year... nothing. Once the shaft was wiped clean you couldn't
even
| tell where the stuffing box seal was located. The shaft has been
installed
| new since 1993.
|
| CM
|
| "Brian McAloon" wrote in message
| . ..
| | Has any gone to a dripless shaft seal from the drip type. Any
| modifications
| | need to be made to the shaft or opening or is it pretty simple.
| |
| |
| | Brian McAloon
| | S/V CLIODHNA M28 OI
| | Pompano Beach, Florida.
| |
| |
|
|
|

That's right MC... and grease isn't really made from turkey fat.

CM

"The_navigator©" wrote in message
...
| You mean teflon-containg grease -right? You don't think the grease is
| made from teflon do ya? The imprecision in you words is matched only by
| that of your thinking.
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| Teflon grease.... my apologies for not taking your obvious lack of
| intellect into consideration. I'll try harder next time to remind myself
to
| write at a level you can comprehend... ;-)
|
| CM
|
| "The_navigator©" wrote in message
| ...
| | Pump teflon? Riiiiiiight.
| |
| | Cheers MC
| |
| | Capt. Mooron wrote:
| |
| | I don't know if that is really required. I use a standard stuffing
box
| with
| | a grease nipple installed and pump Teflon into it. Even at 2500 rpm
I'm
| | lucky to get a drip every minute or so. None gets through when the
shaft
| is
| | not turning. I've removed the rudder and extracted the shaft to
inspect
| for
| | wear last year... nothing. Once the shaft was wiped clean you
couldn't
| even
| | tell where the stuffing box seal was located. The shaft has been
| installed
| | new since 1993.
| |
| | CM
| |
| | "Brian McAloon" wrote in message
| | . ..
| | | Has any gone to a dripless shaft seal from the drip type. Any
| | modifications
| | | need to be made to the shaft or opening or is it pretty simple.
| | |
| | |
| | | Brian McAloon
| | | S/V CLIODHNA M28 OI
| | | Pompano Beach, Florida.
| | |
| | |
| |
| |
| |
|
|
|

On Thu, 30 Oct 2003 23:33:05 -0400, "Capt. Mooron"
wrote this crap:

That's right MC... and grease isn't really made from turkey fat.

The grease my beautiful female fiance an I use is made from corn oil.


Hero@Horvath

I don't spend my money on food. I spend most of my money
on women, porn, booze, and recreation. The rest of it I just waste.

Pure corn all the way!

Cheers MC

Horvath wrote:

On Thu, 30 Oct 2003 23:33:05 -0400, "Capt. Mooron"
wrote this crap:


That's right MC... and grease isn't really made from turkey fat.


The grease my beautiful female fiance an I use is made from corn oil.


Hero@Horvath

I don't spend my money on food. I spend most of my money
on women, porn, booze, and recreation. The rest of it I just waste.

????

"Horvath" wrote in message
...
On Thu, 30 Oct 2003 23:33:05 -0400, "Capt. Mooron"
wrote this crap:

That's right MC... and grease isn't really made from turkey fat.

The grease my beautiful male fiance an I use is made from corn oil.


Hero@Horvath

I don't spend my money on food. I spend most of my money
on women, porn, booze, and recreation. The rest of it I just waste.

WoooooHooooooo! I suppose you know what it's composition really is?

Cheers MC

Capt. Mooron wrote:

That's right MC... and grease isn't really made from turkey fat.

CM

"The_navigator©" wrote in message
...
| You mean teflon-containg grease -right? You don't think the grease is
| made from teflon do ya? The imprecision in you words is matched only by
| that of your thinking.
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| Teflon grease.... my apologies for not taking your obvious lack of
| intellect into consideration. I'll try harder next time to remind myself
to
| write at a level you can comprehend... ;-)
|
| CM
|
| "The_navigator©" wrote in message
| ...
| | Pump teflon? Riiiiiiight.
| |
| | Cheers MC
| |
| | Capt. Mooron wrote:
| |
| | I don't know if that is really required. I use a standard stuffing
box
| with
| | a grease nipple installed and pump Teflon into it. Even at 2500 rpm
I'm
| | lucky to get a drip every minute or so. None gets through when the
shaft
| is
| | not turning. I've removed the rudder and extracted the shaft to
inspect
| for
| | wear last year... nothing. Once the shaft was wiped clean you
couldn't
| even
| | tell where the stuffing box seal was located. The shaft has been
| installed
| | new since 1993.
| |
| | CM
| |
| | "Brian McAloon" wrote in message
| | . ..
| | | Has any gone to a dripless shaft seal from the drip type. Any
| | modifications
| | | need to be made to the shaft or opening or is it pretty simple.
| | |
| | |
| | | Brian McAloon
| | | S/V CLIODHNA M28 OI
| | | Pompano Beach, Florida.
| | |
| | |
| |
| |
| |
|
|
|

Yeah... in Canada they have to write it on the container. You just read it.

Oh that's right... you don't have any down under... it's all imported!

CM

"The_navigator©" wrote in message
...
| WoooooHooooooo! I suppose you know what it's composition really is?
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| That's right MC... and grease isn't really made from turkey fat.
|
| CM
|
| "The_navigator©" wrote in message
| ...
| | You mean teflon-containg grease -right? You don't think the grease is
| | made from teflon do ya? The imprecision in you words is matched only
by
| | that of your thinking.
| |
| | Cheers MC
| |
| | Capt. Mooron wrote:
| |
| | Teflon grease.... my apologies for not taking your obvious lack of
| | intellect into consideration. I'll try harder next time to remind
myself
| to
| | write at a level you can comprehend... ;-)
| |
| | CM
| |
| | "The_navigator©" wrote in message
| | ...
| | | Pump teflon? Riiiiiiight.
| | |
| | | Cheers MC
| | |
| | | Capt. Mooron wrote:
| | |
| | | I don't know if that is really required. I use a standard
stuffing
| box
| | with
| | | a grease nipple installed and pump Teflon into it. Even at 2500
rpm
| I'm
| | | lucky to get a drip every minute or so. None gets through when
the
| shaft
| | is
| | | not turning. I've removed the rudder and extracted the shaft to
| inspect
| | for
| | | wear last year... nothing. Once the shaft was wiped clean you
| couldn't
| | even
| | | tell where the stuffing box seal was located. The shaft has been
| | installed
| | | new since 1993.
| | |
| | | CM
| | |
| | | "Brian McAloon" wrote in message
| | | . ..
| | | | Has any gone to a dripless shaft seal from the drip type. Any
| | | modifications
| | | | need to be made to the shaft or opening or is it pretty
simple.
| | | |
| | | |
| | | | Brian McAloon
| | | | S/V CLIODHNA M28 OI
| | | | Pompano Beach, Florida.
| | | |
| | | |
| | |
| | |
| | |
| |
| |
| |
|
|
|

Your population can read?

Cheers MC

Capt. Mooron wrote:

Yeah... in Canada they have to write it on the container. You just read it.

Oh that's right... you don't have any down under... it's all imported!

CM

"The_navigator©" wrote in message
...
| WoooooHooooooo! I suppose you know what it's composition really is?
|
| Cheers MC
|
| Capt. Mooron wrote:
|
| That's right MC... and grease isn't really made from turkey fat.
|
| CM
|
| "The_navigator©" wrote in message
| ...
| | You mean teflon-containg grease -right? You don't think the grease is
| | made from teflon do ya? The imprecision in you words is matched only
by
| | that of your thinking.
| |
| | Cheers MC
| |
| | Capt. Mooron wrote:
| |
| | Teflon grease.... my apologies for not taking your obvious lack of
| | intellect into consideration. I'll try harder next time to remind
myself
| to
| | write at a level you can comprehend... ;-)
| |
| | CM
| |
| | "The_navigator©" wrote in message
| | ...
| | | Pump teflon? Riiiiiiight.
| | |
| | | Cheers MC
| | |
| | | Capt. Mooron wrote:
| | |
| | | I don't know if that is really required. I use a standard
stuffing
| box
| | with
| | | a grease nipple installed and pump Teflon into it. Even at 2500
rpm
| I'm
| | | lucky to get a drip every minute or so. None gets through when
the
| shaft
| | is
| | | not turning. I've removed the rudder and extracted the shaft to
| inspect
| | for
| | | wear last year... nothing. Once the shaft was wiped clean you
| couldn't
| | even
| | | tell where the stuffing box seal was located. The shaft has been
| | installed
| | | new since 1993.
| | |
| | | CM
| | |
| | | "Brian McAloon" wrote in message
| | | . ..
| | | | Has any gone to a dripless shaft seal from the drip type. Any
| | | modifications
| | | | need to be made to the shaft or opening or is it pretty
simple.
| | | |
| | | |
| | | | Brian McAloon
| | | | S/V CLIODHNA M28 OI
| | | | Pompano Beach, Florida.
| | | |
| | | |
| | |
| | |
| | |
| |
| |
| |
|
|
|