I have the same engine next to the stat is a larg bolt if you remove this
(only for a second} water should pump out .if it doesnt it could be your
impeller
"OldRedNeck" wrote in message
...
It's under a small dome shaped cover either on the cylinder head or the
top
of the block. Held on by 2 bolts. If it is the gasket type, try to save
the
gasket or make a new one. When you have the cover off, remove the stat and
idle the engine for a few seconds to check the water pump and purge the
system




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 01/09/2003