Hi all,

I am getting a boat permit sticker for a local lake for the price of
$50. I have multiple boats, and would like to be able to take whichever
I feel like for that day w/o having to purchase hundreds of dollars
worth of permits (i.e. one for each boat). So I'd like to make the
sticker easily removable and transferable between fiberglass boats. My
first thought was to stick the sticker to one of those static-cling type
glass "stickers", but these don't hang on to the glass all that well,
and probably the added weight of the sticker wouldn't help. Another
option would be to keep layering it with clear tape, and/or double stick
tape.

Anyone have any other suggestions for this problem?

Thanks,

don

May not be the world's neatest solution, but a small Velcro pad - either
hooks or loops - affixed to each boat and the permit on a corresponding thin
piece of rigid plastic (or whatever) backed by the appropriate Velcro (hooks
if loops were used on the boats or vice versa) would give you portability.
Self-sticking Velcro can be found at most fair sized hardware stores.
"don schad" wrote in message
...
Hi all,

I am getting a boat permit sticker for a local lake for the price of
$50. I have multiple boats, and would like to be able to take whichever
I feel like for that day w/o having to purchase hundreds of dollars
worth of permits (i.e. one for each boat). So I'd like to make the
sticker easily removable and transferable between fiberglass boats. My
first thought was to stick the sticker to one of those static-cling type
glass "stickers", but these don't hang on to the glass all that well,
and probably the added weight of the sticker wouldn't help. Another
option would be to keep layering it with clear tape, and/or double stick
tape.

Anyone have any other suggestions for this problem?

Thanks,

don

Why not just leave the backing on the sticker and put it in a map case?
That way you can display it, though not as easily seen as a sticker,
and transfer it from boat to boat without any extra shenanigans.


bkr

bkr wrote:


Why not just leave the backing on the sticker and put it in a map case?
That way you can display it, though not as easily seen as a sticker,
and transfer it from boat to boat without any extra shenanigans.

Well, the "officals" at the place want the sticker to be "permanently"
attached to the boat so that, for example, I can't buy one sticker and
share it with the whole neighborhood. So the idea is to make it look
permanent, but allow me to share it with the whole neighborhood.

don

I run into this problem with my inflatables. Minneosota requires licensing and
display of the license on each boat. In the beginning, I naively pasted my
stickers on to my IK and raft, only to watch them peel off, get abraded into
obscurity, and have to file for duplicates.

I used to carry all of my licenses in a pouch in the top of my paddling hat,
but after losing the hat one year, I had to adopt a better method.

I solved this problem by laminating the sticker and attaching it with a cable
tie to the grab loop on the kayak and a front D ring on the raft. It was
permanent in the sense it needed to be cut off to move it. Since I do license
every boat, I had no reason to move the tag, but did make it much easier to
maintain.

If I buy a State Park permit sticker, the rangers like to see it attached to
the windshield before I drive off, or sometimes, they will attach it. I have
solved this problem, by buying two. One gets attached to my vehicle, and the
other I take home to put on a 3 x 3 inch square of soft vinyl which I can stick
on to the lower corner of the windshield of my choice. This works really well
for the second car in a shuttle when taking new or non-paddling people out for
a day.

Blakely



Blakely LaCroix
Minneapolis, Minnesota, USA.
RBP Clique member # 86.

The best adventure is yet to come.

On 03 Jun 2004 15:29:05 GMT, (Blakely LaCroix)
wrote:

I run into this problem with my inflatables. Minneosota requires licensing and
display of the license on each boat.

Might be a problem with whitewater boats, but I've never had a MN
sticker come off a flat water one. In fact, they're so sturdy that on
my old canoe I used to just paste them on top of each other. Easier
than trying to get one off. Had up to 6 when I gave it away.
Considering they were 3 year stickers, that boat, not new when I
bought it, had done a heck of a lot of duty.

I solved this problem by laminating the sticker and attaching it with a cable
tie to the grab loop on the kayak and a front D ring on the raft. It was
permanent in the sense it needed to be cut off to move it. Since I do license
every boat, I had no reason to move the tag, but did make it much easier to
maintain.


Also, all they have to do is read the sticker. It describes the boat
it's on. Or at least the manufacturer of each boat. If you've got 2
or 3 perceptions, I suppose you could transfer the stickers, but so
few people have more than one boat. Or at least more than one boat by
the same company. (Not referring to anyone in this group, as I know
better, btw). Hmm. Can't recall if they have the length on each,
too.
--
rbc: vixen Fairly harmless

Hit reply to email. But strip out the 'invalid.'
Though I'm very slow to respond.
http://www.visi.com/~cyli

On 2-Jun-2004, "Alan Smith" wrote:

May not be the world's neatest solution, but a small Velcro pad - either
hooks or loops

Better to use the marine Velcro. The regular stuff comes apart when wet.

Mike