Tool question
 

On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?


I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?

And who are you to talk about false information?

Lobsta' boat?
--
John H

"All decisions are the result of binary thinking."

Tool question
 

On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Tool question
 

John H. wrote:
On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -
You refuse to roll down the windows when you fart?

I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?


Sorry, crapbrain, but the "Jim" under discussion here is the Florida
JimJerk, who apparently is now posting as "X".

Tool question
 

Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Its a gay word.

Tool question
 

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

Tool question
 

I've *never* used it. I just learned that it was used on me! I'm very aware
of your copyright on the term. g

--Mike

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Tool question
 

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)



The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.

Tool question
 

"BAR" wrote in message
...
Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Its a gay word.


Careful Blurtie... you're insulting a 'real marine' now.

Tool question
 

Don White wrote:
"BAR" wrote in message
...
Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)
Its a gay word.


Careful Blurtie... you're insulting a 'real marine' now.

Why don't you ask Tom if he is insulted?

Wait a minute Don, which branch of the Canadian Forces did you serve?
Civilian pussy.

Tool question
 

On Sun, 02 Mar 2008 19:56:25 -0500, Wayne.B
wrote:

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

I'll give you a mulligan on that one. :)