Tool question
 

I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?

Tool question
 

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?



What is a "slow moving sign"???

Tool question
 

"JoeSpareBedroom" wrote in message
...
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove these?



What is a "slow moving sign"???

Not sure, it's been on the back of my house since I bought it.

Tool question
 

LoogyPicker wrote:
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?



I believe you have to put the house on jacks first and then remove the
wheels before the sign can be taken off.

Tool question
 

That's a "tamper proof" screw. By circle, do you mean a pin in the center?
If so, get a small nail punch and tap that center pin from one side to
another until it breaks off. Then get the proper sized torx screw driver and
unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?

Tool question
 

You can just order the tool as well
http://cvfsupplyco-store.stores.yaho...torwrense.html

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?

Tool question
 

Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the center?
If so, get a small nail punch and tap that center pin from one side to
another until it breaks off. Then get the proper sized torx screw driver and
unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?





snerk

Tool question
 

On Sun, 02 Mar 2008 17:36:31 GMT, "LoogyPicker"
wrote:

I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?

torx
--
John H

"All decisions are the result of binary thinking."

Tool question
 

On Sun, 02 Mar 2008 12:56:18 -0500, HK wrote:

Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the center?
If so, get a small nail punch and tap that center pin from one side to
another until it breaks off. Then get the proper sized torx screw driver and
unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle in
the middle. Does anyone know what kind of tool I need to remove these?





snerk

Did you spit or swallow that time, Harry?
--
John H

"All decisions are the result of binary thinking."

Tool question
 

"Mike" wrote in message
...
You can just order the tool as well
http://cvfsupplyco-store.stores.yaho...torwrense.html

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove these?




You've just been smithered.....or a cheap version of being smithered.

Tool question
 

Don White wrote:
"Mike" wrote in message
...
You can just order the tool as well
http://cvfsupplyco-store.stores.yaho...torwrense.html

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove these?



You've just been smithered.....or a cheap version of being smithered.




A cheaper Smithers...as if the "original" 53 of them aren't cheesy enough!

Spam Troll Spam...
 

..

Tool question
 

I have absolutely no idea what you are talking about.

--Mike

"Don White" wrote in message
...

"Mike" wrote in message
...
You can just order the tool as well
http://cvfsupplyco-store.stores.yaho...torwrense.html

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove
these?




You've just been smithered.....or a cheap version of being smithered.

Spam Troll Spam...
 

wrote in message
...
.

Stop stalking me, stalker.

Tool question
 

"Mike" wrote in message
...
I have absolutely no idea what you are talking about.



Someone pulled your leg, got the better of you..etc.

Tool question
 

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx screw
driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove
these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

Tool question
 

agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.

Tool question
 

On Mar 2, 5:42*pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?

snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?

Tool question
 

Tool question
 

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

--Mike

"agent X" wrote in message
...

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx
screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove
these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

Tool question
 

On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?


I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?

And who are you to talk about false information?

Lobsta' boat?
--
John H

"All decisions are the result of binary thinking."

Tool question
 

On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Tool question
 

John H. wrote:
On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -
You refuse to roll down the windows when you fart?

I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?


Sorry, crapbrain, but the "Jim" under discussion here is the Florida
JimJerk, who apparently is now posting as "X".

Tool question
 

Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Its a gay word.

Tool question
 

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

Tool question
 

I've *never* used it. I just learned that it was used on me! I'm very aware
of your copyright on the term. g

--Mike

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Tool question
 

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)



The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.

Tool question
 

"BAR" wrote in message
...
Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

Its a gay word.


Careful Blurtie... you're insulting a 'real marine' now.

Tool question
 

Don White wrote:
"BAR" wrote in message
...
Short Wave Sportfishing wrote:
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)
Its a gay word.


Careful Blurtie... you're insulting a 'real marine' now.

Why don't you ask Tom if he is insulted?

Wait a minute Don, which branch of the Canadian Forces did you serve?
Civilian pussy.

Tool question
 

On Sun, 02 Mar 2008 19:56:25 -0500, Wayne.B
wrote:

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

I'll give you a mulligan on that one. :)

Tool question
 

"Short Wave Sportfishing" wrote in message
...
On Sun, 02 Mar 2008 19:56:25 -0500, Wayne.B
wrote:

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

I'll give you a mulligan on that one. :)

You're on record as hating golf. Therefore, layoff the golfing terms!

Tool question
 

On Sun, 02 Mar 2008 19:58:12 -0500, HK wrote:


"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)



The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.

No. Tom uses the word as it was meant to be used. You are just doing
something for which you need to either spit or swallow.

Big difference.
--
John H

"All decisions are the result of binary thinking."

Tool question
 

On Sun, 2 Mar 2008 19:30:54 -0500, "JimH" wrote:


"HK" wrote in message
...
John H. wrote:
On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too
familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to
be
specific.- Hide quoted text -

- Show quoted text -
You refuse to roll down the windows when you fart?

I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?

LMAO at you and your obsession with me.

Get a life Herring.


Harry's the one calling you names!
--
John H

"All decisions are the result of binary thinking."

Tool question
 

"D.Duck" wrote in message
...

"Short Wave Sportfishing" wrote in message
...
On Sun, 02 Mar 2008 19:56:25 -0500, Wayne.B
wrote:

On Mon, 03 Mar 2008 00:16:16 GMT, Short Wave Sportfishing
wrote:

I'll be running a tab. :)

~~ snerk ~~

I'll give you a mulligan on that one. :)

You're on record as hating golf. Therefore, layoff the golfing terms!


I've been waiting for the results of the golf club versus baseball bat
distance challenge.
I am not a golfer (much) but I *did* learn something about energy equaling
mass times velocity squared.
My money is not on Tom on this one, mathematician, grunt and athlete aside.

Eisboch

Tool question
 

John H. wrote:
On Sun, 02 Mar 2008 19:58:12 -0500, HK wrote:

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.

No. Tom uses the word as it was meant to be used. You are just doing
something for which you need to either spit or swallow.

Big difference.


With all you experience at sucking up, I'm sure you can spit and swallow
at the same time.

Tool question
 

"HK" wrote in message
...
John H. wrote:
On Sun, 02 Mar 2008 19:58:12 -0500, HK wrote:

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)

The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.

No. Tom uses the word as it was meant to be used. You are just doing
something for which you need to either spit or swallow.

Big difference.


With all you experience at sucking up, I'm sure you can spit and swallow
at the same time.


Sometimes this NG is at least entertaining. Sometimes it's even thought
provoking.
Unfortunately, most of the time it's like recess in the 6th grade.

Eisboch

Tool question
 

Eisboch wrote:
"HK" wrote in message
...
John H. wrote:
On Sun, 02 Mar 2008 19:58:12 -0500, HK wrote:

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I
feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)
The word "snerk" is in common usage as it is being used here. You cannot
copyright it unless you do it in Nigeria with a lot of long fund-raising
letters.
No. Tom uses the word as it was meant to be used. You are just doing
something for which you need to either spit or swallow.

Big difference.

With all you experience at sucking up, I'm sure you can spit and swallow
at the same time.


Sometimes this NG is at least entertaining. Sometimes it's even thought
provoking.
Unfortunately, most of the time it's like recess in the 6th grade.

Eisboch



I'm merely commenting on HErring's perseveration with his latest pet
phrase.

Tool question
 

"HK" wrote in message
...
Eisboch wrote:
"HK" wrote in message
...
John H. wrote:
On Sun, 02 Mar 2008 19:58:12 -0500, HK wrote:

"Short Wave Sportfishing" wrote in message
...
On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me.
I feel
so dirty now... lol
All you clowns using the term ~~ snerk ~~ copyrighted by me under
the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)
The word "snerk" is in common usage as it is being used here. You
cannot copyright it unless you do it in Nigeria with a lot of long
fund-raising letters.
No. Tom uses the word as it was meant to be used. You are just doing
something for which you need to either spit or swallow.

Big difference.

With all you experience at sucking up, I'm sure you can spit and swallow
at the same time.


Sometimes this NG is at least entertaining. Sometimes it's even thought
provoking.
Unfortunately, most of the time it's like recess in the 6th grade.

Eisboch

I'm merely commenting on HErring's perseveration with his latest pet
phrase.

Why?

Eisboch

Tool question
 

"HK" wrote in message
...
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx
screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little
circle in the middle. Does anyone know what kind of tool I need to
remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so please
help me out. What makes you think I was a draft dodger? Try to be
specific.

Now Harry. Why would I care to help you out after all of the niceties you
have bestowed on me and my fellow veterans. Stew in your own juices, fella.

Tool question
 

agent X wrote:

"HK" wrote in message
...
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too
familiar with the lack of thinking ability of that sort of
mindlessness, so please help me out. What makes you think I was a
draft dodger? Try to be specific.

Now Harry. Why would I care to help you out after all of the niceties
you have bestowed on me and my fellow veterans. Stew in your own juices,
fella.


Just as I suspected...nothing.