Home |
Search |
Today's Posts |
#11
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Mar 6, 7:39�am, Harry Krause wrote:
Vic Smith wrote: On Tue, 06 Mar 2007 10:05:05 -0500, Harry Krause wrote: After wading through many past posts about the MacGregor, among them an excellent *review done by Chuck, according to the salts I will never be sailing on the MacGregor. Hell, I can have the motor hanging lifeless on the transom, 6 feet of dagger board down, 300 sq ft of sail filled with air, and be clipping along at 8 knots or so, but I won't be sailing on the MacGregor. * So that means no work! *Pretty neat (-: It's a terrible boat. Caveat emptor. Harry, as the last sentence of the above para I had written: MacGregors are to "sailors" as Bayliners are to "Krauses." I snipped it. Here you are, so that didn't work. Anyway, thanks for the heads up. *I'm far from sold on it. But if I get one, I sure as hell ain't coming back here. --Vic You probably won't be coming back to shore, either. Make sure you file a float plan.- Hide quoted text - - Show quoted text - Sounds like Sir Krause of the Bayliner Jousts. You are entitled to your opinion, but you are wrong to state that a MacGregor is a patently unsafe or life threatening choice. Like any boat, it must be used with an eye to the weather. I can't speak for other parts of the country, but in the Pacific Northwest these are extremely popular boats. We boat snobs forget that a lot of families don't have $100k or more to put into a boat, yet want to get out on the water and enjoy some time together. Enter the MacGregor; for about $30,000 a family can own a brand new boat that will motor fast enough to do some wakeboarding behind and sail well enough to enjoy sailing (the local dealer has one that he takes out to our Duck Dodge series of informal sailboat races in the summer, and he actually wins from time to time). As a family boat it has a lot to recommend it; sleeps at least four without getting ridiculously creative, adequate galley, enclosed head, etc. The MacGregors are shallow draft, but they can sail by virtue of a retractable daggerboard keel and a water ballast system. I'd shudder to think how a similar sized power boat, (like the YOHO) would do in the stability department if you ran up an equivalent mast and introduced the same sail load. *that* would be dangerous. :-) Would I go offshore in a gale in a MacGregor? Heck no. Nor would I go offshore in a gale in my little 36-foot tug boat. Nor should you go offshore in a gale in your boat. With the literally hundreds of these little boats plying the waters of this region on a regular basis, we would be well aware if they were unsafe for our regional conditions (again, I don't claim to offer an opinion about their suitability for the OP's intended cruising region). The only real knocks launched against the boat are from: 1)a few High-nosed sailors, who eschew anything that's not as "technical" a boat as they feel it should be- (usually including all versions of a sailboat except the one they happen to own), 2: a few Beer-fueled powerboaters who are suspicious of anything with a mast, and often derisive of most other boat brands except the one they happen to own- (its a personal insecurity issue, I think). I'd recommend that if the OP is interested in MacGregor he should look for an owner's group on the web and see what actual users of that boat have experienced in the region where he's considering doing his boating. Until one has been there, done that- or until there's a disproportionate number of rescue incidents or other objective evidence, there's no basis to pronounce a boat unsafe for a specific intended use. That doesn't mean the boat is automatically suitable....simply that one should investigate thoroughly with an open mind before predicting that the boat would be unable to make it back to shore. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Colvic Sailer 29' 9" Project how much to do it??? (long) | General | |||
260 Defiance, not that dissimilar to a Parker | General | |||
Hull Design & Displacement Hulls | General | |||
Type 2 vs. Type 3 Wire | Electronics |