| Home |
| Search |
| Today's Posts |
|
#3
|
|||
|
|||
|
I've never understood why one would want radials on a trailer anyway? It's
not like you're after cornering. "Short Wave Sportfishing" wrote in message ... On Tue, 24 Feb 2004 01:49:41 GMT, "Bruce" wrote: I have a tandem axle boat trailer which currently has four bias-ply tires with disc brakes on the rear axle. The two tires on the brake axle are worn and I am considering replacing them with Radials; I understand that you never mix bias-ply and radials on the same axle, any reason that I should not put radials on the back axle, and leave the bias-ply's on the forward axle?? Never mix bias ply/radial tires period. They are incompatible. Later, Tom S. Woodstock, CT ---------- Basic Fishing Program: 10 - Fish 20 - Eat 30 - Sleep 40 - Goto 10 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Trailer bearing question | General | |||
| Where to find ramp stories? | General | |||
| Trailer Galvanized finish question | General | |||
| New Trailer Question ? | General | |||
| Trailer - Tire change and wheel bearing question | General | |||