Home |
Search |
Today's Posts |
#1
|
|||
|
|||
A nice quality control touch
I spent much of yesterday learning about Grand Banks Eastbay express cruisers.
There are several configurations, all with different appendages to the model name. The one most likely to sell well in the Pacific Northwest with be the SX (sedan express) model featuring a bulkhead between the cockpit and the salon. The boat performed well on a trial run. Due to a number of people expressing a profound unhappiness with my posting opinions and observations about various boats in the NG, I'll not stir up the hornets again with a full description of the boat and its handling characteristics or amenities. Perhaps I can sneak under the radar with a tiny observation, however. There are obviously not a lot of screws exposed on finished surfaces on a boat of this caliber. In certain locations, such as the teak instrument console above the front cabin windows, exposed screws are appropriate because the buyer of the boat will be removing those panels to install clocks, barometers, electronics, and other accessories. Not only are the screws installed in an arrow straight line and absolutley evenly spaced, when the screws are installed they are turned to a point where the slots are identically positioned. Phillips screws, for example, will have one slot perfectly parallel and the other perpendicular to the edge of the panel. Lining the screws up uniformly does not, in and of itself, make a boat better or worse than another, but the fact that the builder has the capacity to even contemplate that such a detail *could* be noticed is encouraging. :-) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fs 1995 Merc 8 HP outboard very nice includes tank and hose. | General |