Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Another trailer light question
I replaced the lights and wiring harness on the trailer with LEDs. I
connected the side and rear clearance light wire (not replaced, coming out the tail-end of the driver side) to the hot wire so there's 3 wires connected in one cap and the two green/ground wires in the other cap. Everything works fine. I disconnected all the clearance lights from its wire thinking it would pull out with the old wire harness. Now that salt can get into the clearance wire from the cuts from the 'saddlebag' connectors, will the tail lights still work after it corrodes? I know the clearance lights are required at night but very rarely do we get caught out after dark. Is the clearance wire for all the side lights not part of the wiring harness I got with the new light kit? CB |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Trailer Light Flasher Murdered by Screwed Up Tail Light? | General | |||
New Trailer Question ? | Cruising | |||
Trailer - Tire change and wheel bearing question | General | |||
Correct Trailer set up for towing my speedboat. | General | |||
Trailer light = submersible? | General |