Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
The 21 will get you more into the power band and is probably the right prop
for what you want to do. The 19 will probably put it right at 4400 or maybe a tad higher which will provide good hole shot. This is why it came w/ this prop. The 21 will be at 4100 to 4200 rpms and should be a good prop. My guess is the 23 was very slow out of the hole. -- Tony my boats at http://t.thomas.home.mchsi.com "Josh Assing" wrote in message ... Here's all the info (for those not following along) 200hp v8 motor outdrive From factory with 19pitch prop Engine RPM ideal range: 4200-4400 Had a 20 pitch 4 blade -- but reved too high. Went to the local prop store -- they gave me a 23 pitch 3 blade. Lots faster (on the range of 10 mph faster) However, no has problems getting up to 4000 rpm, more like 3800 Based on that extreme jump; would a 21 pitch do me better? I don't want to keep exchanging props (not to mention the expense of it -- ferry tickets and all) and would like to start "using" the boat... Thanks -josh --- Remove x's to send. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
prop advise needed | General | |||
Prop | General | |||
Volvo 270 outdrive prop cone replacement? | General | |||
Removing lower unit from 40 hp Johnson outboard - Help? | General | |||
1972 Johnson 20 HP - Can't Find A Prop | Boat Building |