Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Yo Tim - Carburetor

The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!
  #2   Report Post  
posted to rec.boats
Tim Tim is offline
external usenet poster
 
First recorded activity by BoatBanter: Nov 2006
Posts: 19,111
Default Yo Tim - Carburetor

John H
The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!
........

Delorto makes a great carb. They’re durable and simple, but can make you want to pull your hair out to rebuild them.

But if you wanted to update your motorcycle and get rid of the carburetors, you can always pull the whole engine and install twin Volvo turbo diesels.....
  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2015
Posts: 10,424
Default Yo Tim - Carburetor

On 6/12/18 10:12 AM, Tim wrote:
John H
The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!
.......

Delorto makes a great carb. They’re durable and simple, but can make you want to pull your hair out to rebuild them.

But if you wanted to update your motorcycle and get rid of the carburetors, you can always pull the whole engine and install twin Volvo turbo diesels....


My guess is that with all his health problems and proclivity to injure
his limbs, Zen and the Art of Maintaining Obsolete Motorcycles won't be
on Herring's reading list for long.
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2011
Posts: 5,756
Default Yo Tim - Carburetor

Keyser Soze

- show quoted text -

" My guess is that with all his health problems and proclivity to injureÂ*
his limbs, Zen and the Art of Maintaining Obsolete Motorcycles won't beÂ*
on Herring's reading list for long."


I hope none of his grandkids are allowed on the back of his Motto Guzzler. I'd be concerned for their safety.

  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Yo Tim - Carburetor

On Tue, 12 Jun 2018 07:12:46 -0700 (PDT), Tim wrote:

John H
The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!
.......

Delorto makes a great carb. They’re durable and simple, but can make you want to pull your hair out to rebuild them.

But if you wanted to update your motorcycle and get rid of the carburetors, you can always pull the whole engine and install twin Volvo turbo diesels....


LOL!


  #6   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Yo Tim - Carburetor

On Tue, 12 Jun 2018 10:18:06 -0400, Keyser Soze wrote:

On 6/12/18 10:12 AM, Tim wrote:
John H
The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!
.......

Delorto makes a great carb. They’re durable and simple, but can make you want to pull your hair out to rebuild them.

But if you wanted to update your motorcycle and get rid of the carburetors, you can always pull the whole engine and install twin Volvo turbo diesels....


My guess is that with all his health problems and proclivity to injure
his limbs, Zen and the Art of Maintaining Obsolete Motorcycles won't be
on Herring's reading list for long.


Never needed it. Bought Darlington's book ages ago. Although written for the 850 T-3, it's got all
the info I'll ever need.
  #7   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Yo Tim - Carburetor

On Tue, 12 Jun 2018 07:27:13 -0700 (PDT), True North wrote:

Keyser Soze

- show quoted text -

" My guess is that with all his health problems and proclivity to injure*
his limbs, Zen and the Art of Maintaining Obsolete Motorcycles won't be*
on Herring's reading list for long."


I hope none of his grandkids are allowed on the back of his Motto Guzzler. I'd be concerned for their safety.


They've all been given rides as soon as they were big enough for their feet to reach the passenger
pegs and they wore the right gear.

I'm glad to hear you're concerned for their safety. Me too!

It's spelled 'Moto Guzzi'. And, it gets almost 50mpg. Not too shabby!
  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 36,387
Default Yo Tim - Carburetor

On Tue, 12 Jun 2018 10:03:36 -0400, John H.
wrote:

The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!


I think I would still try another float. If this is the plastic foam
ones they do get impregnated with gas and do not float high enough.
That was the way it was in my Corvette., I kept adjusting the float
level until there was nothing more to adjust. A tech at Rosenthal
Chevy was sitting on the curb eating his lunch and bet me if I put
that float on the ground and stepped on it gas would shoot out. I
bought a new one first, then I tried it. He was right.
He asked if I had been putting dry gas in the tank (alcohol). Yes I
had. That kills them according to him. The problem did start after I
had water in my gas but I did not make the connection because it took
a month or so to show up.
  #9   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Yo Tim - Carburetor

On Tue, 12 Jun 2018 16:03:05 -0400, wrote:

On Tue, 12 Jun 2018 10:03:36 -0400, John H.
wrote:

The picture on the bottom left shows how the float adjustment is done on my carb floats. Mine are
the PHF 30's with connected floats.

https://www.ducatimeccanica.com/dell...lorto_3_2.html

But, the 18mm adjustment did not have the floats coming high enough in the bowl to shut off the fuel
flow. I bent the damn floats down to about the PHBL settings (24-25mm). Now the floats are pushing
the needle up enough to shut off the fuel flow.

Sure wish I had Harry's Ducati to contend with. Just think - if it's never ridden, it won't ever
have a problem!


I think I would still try another float. If this is the plastic foam
ones they do get impregnated with gas and do not float high enough.
That was the way it was in my Corvette., I kept adjusting the float
level until there was nothing more to adjust. A tech at Rosenthal
Chevy was sitting on the curb eating his lunch and bet me if I put
that float on the ground and stepped on it gas would shoot out. I
bought a new one first, then I tried it. He was right.
He asked if I had been putting dry gas in the tank (alcohol). Yes I
had. That kills them according to him. The problem did start after I
had water in my gas but I did not make the connection because it took
a month or so to show up.


The float is not the problem. It's a 10 gram float, plastic surface hollow on the inside. The
interior cannot get impregnated, unless there is a hole in the float. There isn't. (Number 8 in the
diagram. http://www.dellortoshop.com/drawings...ew_drawing.jpg

However, now the float is adjusted too low. It's shutting off the gas before enough is getting in
the carb to fire that cylinder. Tomorrow I'll start over with the float adjusting.
  #10   Report Post  
posted to rec.boats
Tim Tim is offline
external usenet poster
 
First recorded activity by BoatBanter: Nov 2006
Posts: 19,111
Default Yo Tim - Carburetor


- show quoted text -
The float is not the problem. It's a 10 gram float, plastic surface hollow on the inside. The
interior cannot get impregnated, unless there is a hole in the float. There isn't. (Number 8 in the
diagram. http://www.dellortoshop.com/drawings...ew_drawing.jpg

However, now the float is adjusted too low. It's shutting off the gas before enough is getting in
the carb to fire that cylinder. Tomorrow I'll start over with the float adjusting.

.....


God luck.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Carburetor day! Poco Deplorevole General 3 May 25th 17 03:46 PM
Getting water out carburetor [email protected] General 2 August 2nd 08 07:42 PM
need carburetor parts tom Boat Building 6 July 3rd 06 11:11 AM
need carburetor parts tom General 2 July 1st 06 11:41 AM


All times are GMT +1. The time now is 12:30 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017