Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]() "David Ditch" wrote in message ... I have the option of a pump out or no pump out head. What is invoved in pumping out? Where? There are a variety of different head arrangements, some of which may be illegal in your boating area. A direct discharge system uses a pump to directly empty the toilet bowl overboard through a thru-hull fitting in the bottom of the boat. Such a system is legal if you are a few miles out in the ocean but is NOT legal in any bay or inland waterway. A variation of that system is to treat the waste and then dump it overboard. A "Lectra-san" is a brand name of such a system. Dumping the treated waste is acceptable in some bays and inland tribrutaries, but is still illegal in many areas. The most common head arrangment for use in inland waters is the holding tank. The same toilet as the direct discharge is usually used, but the waste is pumped into a holding tank instead of overboard. Many boats that are used in both inland and off shore will often have a "Y Valve" so they can choose between pumping overboard or into the tank. Beware, though, as many inland areas consider the Y-valve to be illegal. A variation of the holding tank approach is a "porta-pottie". This uses a very simple toilet that simply dumps the waste into a self contained holding tank directly under the seat. You can usually separate the tank portion from the seat portion and carry it to any restroom to empty. A variation of the porta-pottie is to include a pump-out fitting so that the tank can be emptied while it is still in place. Obviously, if you have the pump-out fitting then this fitting would have to be removed before you could manually carry the tank off to be emptied. On any boat that has a holding tank with pump out fitting the proceedure to empty it is essentially the same. The pump out fitting is a deck plate that looks just like the filler plates for your water or gas. DON'T mix them up! To empty the tank, you drive the boat over to the pumpout station, hold the hose into the open fitting, start the pump. If the pump out station is well maintained this is an easy operation. Sometimes finding a pump out station that works at all is difficult, and when you do find one it isn't in the best of condition. In some areas the pump out stations are free and open to the public (these are generally the poorly maintained or non working ones!). In other areas you have to pay to use the dump station. $15 is a fairly common fee to use a private dump station, although many marinas offer it free to their tenants. If not pumped out, what is involved in dumping the wast in the little tank? My first cruiser was a 25 foot Stephens. I used a porta-pottie for my family of four (two adults, two small children). A porta-pottie with a 3 gallon tank was enough for one day. For two days, maybe three a 6 gallon tank was necessary. If my kids had been bigger I suspect that the 6 gallons would not have been enough. On the plus side, the tank was so easy to deal with. I kept the boat in a slip at a marina, so when I returned I just unhooked the tank, walked down the dock to the restroom and dumped it. The time and hassle was NOTHING compared to cruising over to the dump station. It also always worked! Some marinas don't like people dumping porta-potties into their restroom, so you could run into issues there. If the marina also has a RV park, then they might have a RV dump station that you can carry it down to and dump it there. If you are going to carry the tank to be emptied I would recommend the 6 gallon tank. If you are going to rely on just the pump out , then I would recommend a tank of at least 40 gallons. Rod |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
Elec Question Water Pump & DC | General | |||
Jabsco Head - help! | General | |||
Priming areator pump | General | |||
Need to pump shit? | General |