Home |
Search |
Today's Posts |
|
#1
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
|
#3
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote:
On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. |
#4
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On 1/7/2018 8:02 PM, Its Me wrote:
On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. |
#5
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
Mr. Luddite wrote:
On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. Just reset the codes via the ODB reader. |
#6
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On 1/7/2018 10:52 PM, Bill wrote:
Mr. Luddite wrote: On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. Just reset the codes via the ODB reader. No. That just masks the problems. I'd like to see him remove the 12 volts from the entire system. He charged it but I don't think he actually removed it. Not saying it will work but if something is latched "off" it could reset it. I am thinking more about the remote starter problem, not the glow plug issue. His truck will run with one or two glow plugs out. |
#7
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On Sun, 7 Jan 2018 21:31:36 -0500, "Mr. Luddite"
wrote: On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. On these new cars that is more like unplugging it, taking the CMOS battery out and pushing the power on button. That sommich will forget everything you ever taught it. |
#8
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On 1/7/2018 11:18 PM, wrote:
On Sun, 7 Jan 2018 21:31:36 -0500, "Mr. Luddite" wrote: On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. On these new cars that is more like unplugging it, taking the CMOS battery out and pushing the power on button. That sommich will forget everything you ever taught it. Good. That's what I want. I've done this in the past after driving like an old lady over a long period. The vehicle learns your driving habits, adjusting things like advance, shift points, etc. Removing the battery resets it and it feels like a new vehicle again until it relearns. |
#9
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On Sun, 7 Jan 2018 21:31:36 -0500, "Mr. Luddite" wrote:
On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. You could just tell me directly, ya know! Will give that a try. Didn't do anything. Same remote problems, and same codes. Shop tomorrow. |
#10
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On 1/8/2018 12:11 PM, John H wrote:
On Sun, 7 Jan 2018 21:31:36 -0500, "Mr. Luddite" wrote: On 1/7/2018 8:02 PM, Its Me wrote: On Sunday, January 7, 2018 at 7:56:23 PM UTC-5, wrote: On Sun, 07 Jan 2018 16:44:50 -0500, John H wrote: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. You shouldn't have any problem testing the ABS in this weather. Go to a deserted parking lot that has some ice/snow on it and try to lock them up. You will know right away if the ABS is working. Not only that, but if the ABS is really disabled, your dash should be lit up like a Christmas tree! Are those the specific error codes for your vehicle, or the generic ones listed for your reader? They can be a bit different. If I were John I'd try the "Control-Alt-Delete" procedure. Disconnect the positive lead from the battery, wait for about 10 minutes, reconnect and then see if the codes are still there and if his remote starter works properly. You could just tell me directly, ya know! Will give that a try. Didn't do anything. Same remote problems, and same codes. Shop tomorrow. Ok. I think it's broke. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
remote shifter | General | |||
FS: Remote Spotlight in NY | Marketplace | |||
Remote oil filter kit?? | Boat Building | |||
remote oil filter kit?? | Cruising | |||
Overheating, Hydrostatic lock, ring gears and starters | General |