Home |
Search |
Today's Posts |
#72
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
John H Wrote in message:
On Mon, 8 Jan 2018 08:19:43 -0500 (EST), justan wrote: "Mr. Luddite" Wrote in message: On 1/8/2018 6:57 AM, justan wrote: John H Wrote in message: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. 10 things to check: Improper Starting Procedure Vehicle Not in ?Park? Too Many Remote Start Attempts Coolant and Oil Pressure Unlatched Hood Hazard Warning Lights The Key is in the Car Check Engine Light Dead Keyfob Battery Check the Manual- x Regarding # 4 in your list: For what it's worth my remote start will only work twice (two, 10 min. cycles). A third attempt to remote start won't work until the key is inserted and turned to "on" or after the truck has been started normally using the key. After that the remote will work again for another 2 cycles. However, John has said that his remote will initially start his truck but then it dies after a few seconds. That's not normal. Mine will remote start (using my second key/FOB) if the other key/FOB set is in the truck but not inserted in the ignition. I can also remote start it using the GMC app that's in my smartphone. If I try doing that with the key in the ignition, but in the "off" position, the app on the smartphone comes back with a message saying, "Cannot start, key in ignition". Logic tells me that 4 or 8 could be the only things on that list that could cause shutdown after start. Nope. Something else can cause it. Don't know what yet, but it's probably computer related, or associated with the bad glow plug. Yup. You agree with what I said. You notice how carefully I worded my statement? :-) -- x ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#73
posted to rec.boats
|
|||
|
|||
Speaking of remote starters...
On Tue, 9 Jan 2018 14:51:34 -0500 (EST), justan wrote:
John H Wrote in message: On Mon, 8 Jan 2018 08:19:43 -0500 (EST), justan wrote: "Mr. Luddite" Wrote in message: On 1/8/2018 6:57 AM, justan wrote: John H Wrote in message: On Sun, 07 Jan 2018 14:40:34 -0500, wrote: On Sun, 07 Jan 2018 12:59:51 -0500, John H wrote: Upon hooking up the OBD scanner, I get a C0899 (Device voltage low), a C0561 (ABS disabled, invalid serial data received), and P0673 (#3 Glow plug circuit). The first (and maybe the second) may be due to low batteries, which I've treated badly this winter - only short trips to the store, etc. Trips that should have been made walking or riding a motorcycle. So, the charger is on, and we'll see what happens when the batteries are up to snuff. "Glow plug" figured prominently in those threads I read about remote start not working. It might be worth a shot. Does it run a little rough for a minute on a regular start? I don't know a lot about diesels but I am guessing if a glow plug was not working, it would miss a bit until it started "dieseling" It may just be a loose connection I guess. Oh, and charging the batteries didn't change any of the readings. Looks like I've got an ABS problem and a glow plug problem. 10 things to check: Improper Starting Procedure Vehicle Not in ?Park? Too Many Remote Start Attempts Coolant and Oil Pressure Unlatched Hood Hazard Warning Lights The Key is in the Car Check Engine Light Dead Keyfob Battery Check the Manual- x Regarding # 4 in your list: For what it's worth my remote start will only work twice (two, 10 min. cycles). A third attempt to remote start won't work until the key is inserted and turned to "on" or after the truck has been started normally using the key. After that the remote will work again for another 2 cycles. However, John has said that his remote will initially start his truck but then it dies after a few seconds. That's not normal. Mine will remote start (using my second key/FOB) if the other key/FOB set is in the truck but not inserted in the ignition. I can also remote start it using the GMC app that's in my smartphone. If I try doing that with the key in the ignition, but in the "off" position, the app on the smartphone comes back with a message saying, "Cannot start, key in ignition". Logic tells me that 4 or 8 could be the only things on that list that could cause shutdown after start. Nope. Something else can cause it. Don't know what yet, but it's probably computer related, or associated with the bad glow plug. Yup. You agree with what I said. You notice how carefully I worded my statement? :-) OK, OK, you're pretty slick! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
remote shifter | General | |||
FS: Remote Spotlight in NY | Marketplace | |||
Remote oil filter kit?? | Boat Building | |||
remote oil filter kit?? | Cruising | |||
Overheating, Hydrostatic lock, ring gears and starters | General |