Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

--


I don't need anger management. I just need people to stop ****ing me off!
Respectfully submitted by Justan

On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].

On 1/7/2015 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].


There's that "snarliness" he was whining about. Or is it? I think
reminding him of his past indiscretions is a public service. Keep up the
good work.

--


I don't need anger management. I just need people to stop ****ing me off!
Respectfully submitted by Justan

On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

On 1/7/2015 7:39 PM, Keyser Söze wrote:
On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

So ****ing what.. Who the **** are you to even talk about the tone here.
You are a ****ing clown, hurry up the **** and die will you? Holy
****ing ****, you talking about tone here is a joke. Anybody taking you
seriously is a ****ing retard...

On 1/7/15 7:41 PM, KC wrote:
On 1/7/2015 7:39 PM, Keyser Söze wrote:
On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

So ****ing what.. Who the **** are you to even talk about the tone here.
You are a ****ing clown, hurry up the **** and die will you? Holy
****ing ****, you talking about tone here is a joke. Anybody taking you
seriously is a ****ing retard...


A perfect example of why the "tone" in rec.boats is still crappy these
days and has nothing to do with my posts.

Have a nice evening.

On Wednesday, 7 January 2015 20:41:58 UTC-4, KC wrote:
On 1/7/2015 7:39 PM, Keyser Söze wrote:
On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

So ****ing what.. Who the **** are you to even talk about the tone here.
You are a ****ing clown, hurry up the **** and die will you? Holy
****ing ****, you talking about tone here is a joke. Anybody taking you
seriously is a ****ing retard...


Wow!
talk about a snarky tone.....it must be that time of the month again.

The status of rec.boats in a nutshell, thanks to our Connecticut Scotty:


On 1/7/15 7:41 PM, KC wrote:

So ****ing what.. Who the **** are you to even talk about the tone here.
You are a ****ing clown, hurry up the **** and die will you? Holy
****ing ****, you talking about tone here is a joke. Anybody taking you
seriously is a ****ing retard...

On Wed, 07 Jan 2015 16:59:45 -0500, Keyser Söze
wrote:


Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.



Why? :)