Barrel Threading...continued...
 

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

Barrel Threading...continued...
 

On 1/7/15 5:23 PM, wrote:
On Wed, 07 Jan 2015 16:59:45 -0500, Keyser Söze
wrote:


Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

Sounds like a deal to me.
The problem is the sight is useless with the can on.
If that is a problem, you might want some kind optic mounted high


Indeed. The sight is for when the silencer is not mounted. The back
sight is adjustable. Also, Ruger supplies a rail for the pistol, and I
have a little Burris Fastfire III red dot sight that sits on it. There's
plenty of elevation adjustment in it, and it will accommodate the silencer.

I'm sending the upper (the barrel) to Volquartsen separately from the
lower frame, which they also will be "modding" for me. By not sending
the pistol in to them as a complete firearm, I can use regular postage
and save a bundle each way, I was told, about $72. :)

Barrel Threading...continued...
 

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

So nice of you to keep us in the loop. ;-)

--


I don't need anger management. I just need people to stop ****ing me off!
Respectfully submitted by Justan

Barrel Threading...continued...
 

On 1/7/2015 5:23 PM, wrote:
On Wed, 07 Jan 2015 16:59:45 -0500, Keyser Söze
wrote:


Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

Sounds like a deal to me.
The problem is the sight is useless with the can on.
If that is a problem, you might want some kind optic mounted high


A red dot thingie, maybe?

--


I don't need anger management. I just need people to stop ****ing me off!
Respectfully submitted by Justan

Barrel Threading...continued...
 

On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].

Barrel Threading...continued...
 

On Wed, 07 Jan 2015 16:59:45 -0500, Keyser Söze
wrote:


Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

Why? :)

Barrel Threading...continued...
 

On 1/7/2015 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].


There's that "snarliness" he was whining about. Or is it? I think
reminding him of his past indiscretions is a public service. Keep up the
good work.

--


I don't need anger management. I just need people to stop ****ing me off!
Respectfully submitted by Justan

Barrel Threading...continued...
 

On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

Barrel Threading...continued...
 

On 1/7/2015 7:39 PM, Keyser Söze wrote:
On 1/7/15 6:05 PM, Wayne.B wrote:
On Wed, 07 Jan 2015 17:52:05 -0500, Justan Olphart
wrote:

On 1/7/2015 4:59 PM, Keyser Söze wrote:

Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

So nice of you to keep us in the loop. ;-)

===

So nice of him to enjoy his hobby at our expense, as well as his other
creditors. It almost makes you want to be a "special" person like him
[not].



And once again, Wayne, *you* are setting the snarky tone in rec.boats.

So ****ing what.. Who the **** are you to even talk about the tone here.
You are a ****ing clown, hurry up the **** and die will you? Holy
****ing ****, you talking about tone here is a joke. Anybody taking you
seriously is a ****ing retard...

Barrel Threading...continued...
 

On 1/7/15 6:05 PM, Poquito Loco wrote:
On Wed, 07 Jan 2015 16:59:45 -0500, Keyser Söze
wrote:


Volquartsen will thread and crown the barrel on my Ruger Mark III for
$65 and move the front sight cut back on the barrel for an additional
$30. That's the best price I've found and with a reputable company.
Turnaround time is 10 to 14 days...

I bought the silencer to attach to my AR 15/22, which already has a
threaded barrel, but it would be nice to use it on a pistol, too.

:)

Why? :)


I have a couple of friends who like to shoot but are overly sensitive to
the noise. Muffs and plugs don't seem to help them, but a "silenced" gun
in .22LR would be fine. I am considerate of my friends.