Home |
Search |
Today's Posts |
#1
posted to rec.boats
|
|||
|
|||
Trim/tilt problem
Looking at my 90 hp yamaha and the service manual, I find that I may
be low on hydraulic fluid. I have looked all over the manual and cannot find what fluid to use although looking on the web I do find that Yamaha sells a fluid just for this purpose. The manual says to use ATF Dexron II to lube seals on it and many people say you can use Dexron II. If stuck in the "up" position, one can use a release valve on the starboard side recessed in a hole with a screwdriver slot to release the hydraulic pressure keeping it up. Then, you prob have just enough hydraulic pressure for trim and tilt and it will go all the way back up very slowly. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
mariner 40 hp tilt trim problem | General | |||
1970 Mercury 1150 Tilt and Trim Problem | General | |||
Trim/tilt problem (no down tilt available) | General | |||
Tilt & Trim ???? | General | |||
Volvo Out Drive Problem (tilt/trim) | General |