About Us

Dr. Karen Grear, MD, PhD, STD[_2_]

On 10/1/10 1:28 PM, Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

Harry,
That always bothers me so much. When you ask for input, and then when
someone gives you input, you ignore it and tell them what you are going
to do.

If you are just going to do whatever you want, why bother to ask the
question.

When I was working on one of my PhD's, we did a case study about a man
who suffered from extreme low self esteem and would always over
compensate. I mentioned you as a perfect example of someone suffering
from this disorder. We used you as the case studies for the rest of the
semester.

--
Dr. Karen Grear
Harry's Landlord

Secular Humoresque[_2_]

In article ,
says...

On Fri, 01 Oct 2010 13:28:05 -0400, Secular Humoresque
wrote:

On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

I would go to a marine contractor and get real PT at .80 CCA and not
the green washed ACQ they sell at HD/Lowes. (just don't let your kids
eat it)
Also note that ACQ requires hot dipped galvanized or stainless
hardware.

Let the spoofer go, he knows EVERYTHING!

Secular Humoresque[_2_]

In article ,
says...

On Fri, 01 Oct 2010 13:28:05 -0400, Secular Humoresque
wrote:

On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

I would go to a marine contractor and get real PT at .80 CCA and not
the green washed ACQ they sell at HD/Lowes. (just don't let your kids
eat it)
Also note that ACQ requires hot dipped galvanized or stainless
hardware.

Let the spoofer go at it. 45 PSF.........Haaahaa!!!!

Secular Humoresque

On 10/1/10 2:40 PM, wrote:
On Fri, 01 Oct 2010 13:28:05 -0400, Secular Humoresque
wrote:

On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

I would go to a marine contractor and get real PT at .80 CCA and not
the green washed ACQ they sell at HD/Lowes. (just don't let your kids
eat it)
Also note that ACQ requires hot dipped galvanized or stainless
hardware.

There's an idea... already planned on using stainless.

--
Republicans are the Party of No:
No Leaders / No Ideas / No Morals

Secular Humoresque

On 10/1/10 3:26 PM, Secular Humoresque wrote:
On 10/1/10 2:40 PM, wrote:
On Fri, 01 Oct 2010 13:28:05 -0400, Secular Humoresque
wrote:

On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a
good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

I would go to a marine contractor and get real PT at .80 CCA and not
the green washed ACQ they sell at HD/Lowes. (just don't let your kids
eat it)
Also note that ACQ requires hot dipped galvanized or stainless
hardware.

There's an idea... already planned on using stainless.

Engineer's stress analysis on structure per proposed plan:

Stress Analysis:
Level 1
Component PSF
Joist Deflection 472
Joist Bending 82
Joist Shear 168
Joist Compression 180
Beam Deflection 70
Beam Bending 70
Beam Shear 55
Bolt Shear 69
Post Stability 104

LG[_5_]

Secular Humoresque wrote:
On 10/1/10 2:40 PM, wrote:
On Fri, 01 Oct 2010 13:28:05 -0400, Secular Humoresque
wrote:

On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know,
the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a
good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of
transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.

I'll be using 2x12's on 12" centers for the joists. Deck will support a
45 PSF live load. I'll be using Lowe's "Top Choice Structural Treated"
lumber for structure.

I would go to a marine contractor and get real PT at .80 CCA and not
the green washed ACQ they sell at HD/Lowes. (just don't let your kids
eat it)
Also note that ACQ requires hot dipped galvanized or stainless
hardware.

There's an idea... already planned on using stainless.

You can't afford it.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windlass project for my aluminum b oat is complete! (With photos ofthe project.)	FishWisher	General	14	September 14th 09 02:55 AM
Hard Bimini Construction? Foam & Resin Construction?	Glenn \(s/v Seawing\)[_3_]	Cruising	26	September 29th 07 03:45 AM
One-Off Construction?	(PeteCresswell)	General	2	February 21st 06 01:52 AM
The re-construction?	Don White	General	14	September 8th 05 02:31 PM
Sail construction	Thom Stewart	ASA	33	January 27th 05 06:46 AM

Menu

About Us