Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2010
Posts: 1,132
Default For my next construction project...



"jps" wrote in message
news
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.


I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.


Treated in those days was arsenic compounds, not really a good surface to
walk on. And oiling it every year, is extra work, and then when kids crawl
on it, they get all dirty and black from the dirt the oil attracted. I had
a redwood deck before the Trex and it caused any kid or grandkid to become
filthy.

  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2010
Posts: 215
Default For my next construction project...

"Califbill" wrote in message news


"jps" wrote in message
news
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.


I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.


Treated in those days was arsenic compounds, not really a good surface to
walk on. And oiling it every year, is extra work, and then when kids crawl
on it, they get all dirty and black from the dirt the oil attracted. I had
a redwood deck before the Trex and it caused any kid or grandkid to become
filthy.


Black and slimy is apparently the look he is going for.

--
Harry
"The 'C' students run the world."
  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2009
Posts: 3,267
Default For my next construction project...

On Oct 1, 12:21*pm, Secular Humoresque wrote:
I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

--
Republicans are the Party of No:
No Leaders / No Ideas / No Morals


Is this to tie your Boat to??? If not, **** off.
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2010
Posts: 78
Default For my next construction project...

*e#c wrote:
On Oct 1, 12:21 pm, Secular wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

--
Republicans are the Party of No:
No Leaders / No Ideas / No Morals

Is this to tie your Boat to??? If not, **** off.

You are responding to Harry. He's on your very short list of friends
here, Yellow Teeth.
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2010
Posts: 52
Default For my next construction project...



"LG" wrote in message
...
*e#c wrote:
On Oct 1, 12:21 pm, Secular wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

--
Republicans are the Party of No:
No Leaders / No Ideas / No Morals

Is this to tie your Boat to??? If not, **** off.

You are responding to Harry. He's on your very short list of friends
here, Yellow Teeth.



"was on"....



  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2010
Posts: 78
Default For my next construction project...

Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.


I'll be using 2x12's on 12" centers for the joists. Deck will support
a 45 PSF live load. I'll be using Lowe's "Top Choice Structural
Treated" lumber for structure.

You clearly have no idea what you are talking about. 12" centers for a
15' span of 2X12's? You may be a fat-ass but 2X10's 16" OC will carry
you and Don. The 45PSF is bull****, too.
  #9   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2009
Posts: 3,267
Default For my next construction project...

On Oct 1, 8:32*pm, LG wrote:
Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
*wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.


I have no concerns about structure; I know what to do about that.


I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.


The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.


Experiences with "trex" or other similar products?


Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.


I'll be using 2x12's on 12" centers for the joists. Deck will support
a 45 PSF live load. I'll be using Lowe's "Top Choice Structural
Treated" lumber for structure.


You clearly have no idea what you are talking about. *12" centers for a
15' span of 2X12's? *You may be a fat-ass but 2X10's 16" OC will carry
you and Don. *The 45PSF is bull****, too.


Our own " counter boy " Kreuger here would know. You all know him,
he's the one under a womans thumb. Too stupid to do any management,
just a grunt Counter Boy, in Pompano Florida.

He's also the "Head Toilet Stall Maintainer " as well. It's been his
only promotion in 5 years.

Kreuger and the Panty Liner Ingersoll would make a good team. Kreuger
would design the stairs, and build them. Ingersoll would test the
stairwells " in his famous fashion ".LMAO !!!!!!
  #10   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Apr 2010
Posts: 1,865
Default For my next construction project...



"*e#c" wrote in message
...
On Oct 1, 8:32 pm, LG wrote:
Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.


I have no concerns about structure; I know what to do about that.


I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know,
the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a
good
washing, et cetera.


The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of
transparent
stain every season.


Experiences with "trex" or other similar products?


Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.


I'll be using 2x12's on 12" centers for the joists. Deck will support
a 45 PSF live load. I'll be using Lowe's "Top Choice Structural
Treated" lumber for structure.


You clearly have no idea what you are talking about. 12" centers for a
15' span of 2X12's? You may be a fat-ass but 2X10's 16" OC will carry
you and Don. The 45PSF is bull****, too.


Our own " counter boy " Kreuger here would know. You all know him,
he's the one under a womans thumb. Too stupid to do any management,
just a grunt Counter Boy, in Pompano Florida.

He's also the "Head Toilet Stall Maintainer " as well. It's been his
only promotion in 5 years.

Kreuger and the Panty Liner Ingersoll would make a good team. Kreuger
would design the stairs, and build them. Ingersoll would test the
stairwells " in his famous fashion ".LMAO !!!!!!


Good idea for a comedy act.
Ditzy Dan would shoddily design & build staircases with the tools he can
sneak out of Elite Contractor Supply and the Freak would then be thrown down
same.
The question would be... what would last longer, Ditzy's poorly constructed
staircase or The Freaks head.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windlass project for my aluminum b oat is complete! (With photos ofthe project.) FishWisher General 14 September 14th 09 01:55 AM
Hard Bimini Construction? Foam & Resin Construction? Glenn \(s/v Seawing\)[_3_] Cruising 26 September 29th 07 02:45 AM
One-Off Construction? (PeteCresswell) General 2 February 21st 06 12:52 AM
The re-construction? Don White General 14 September 8th 05 01:31 PM
Sail construction Thom Stewart ASA 33 January 27th 05 05:46 AM


All times are GMT +1. The time now is 10:48 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017