Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Mon, 16 Mar 2009 20:55:11 -0600, "SteveB"
wrote: "Richard Casady" wrote in message .. . On Mon, 16 Mar 2009 07:09:14 -0600, "SteveB" wrote: Is there any solution one uses to soak carb bodies to get off that crud? They call it carb cleaner and the sell it at auto parts houses. Casady I call it old pre mix gas, and I have a couple of gallons of it in my shed. Steve Carb cleaner will dissolve many plastics. It will remove paint, and can give you a nasty skin burn in next to no time. It is what you want. Run that old premix through a strainer to take out the leaves and dead flies, and add it to you cars tank at say 10%. My 22 ft fish/ski has a pair of 25 gal tanks, and if it was my stale gas I would pour a gallon in each tank. Casady |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() "Richard Casady" wrote in message ... On Mon, 16 Mar 2009 20:55:11 -0600, "SteveB" wrote: "Richard Casady" wrote in message . .. On Mon, 16 Mar 2009 07:09:14 -0600, "SteveB" wrote: Is there any solution one uses to soak carb bodies to get off that crud? They call it carb cleaner and the sell it at auto parts houses. Casady I call it old pre mix gas, and I have a couple of gallons of it in my shed. Steve Carb cleaner will dissolve many plastics. It will remove paint, and can give you a nasty skin burn in next to no time. It is what you want. Run that old premix through a strainer to take out the leaves and dead flies, and add it to you cars tank at say 10%. My 22 ft fish/ski has a pair of 25 gal tanks, and if it was my stale gas I would pour a gallon in each tank. Casady Carb cleaner also removes old varnish from gelcoat. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Gamefisher 7.5 Impeller Replacement? | General | |||
3.0hp GameFisher motor Spark Gap | General | |||
3.0hp GameFisher motor | General | |||
GAMEFISHER 3HP problem | General | |||
Gamefisher 3 HP problem | General |