| Home |
| Search |
| Today's Posts |
|
#2
posted to rec.boats.electronics
|
|||
|
|||
Raymarine and third party equipment via NMEA gives problem
Water temperature coming from the SIMRAD equipment (so wiring is OK)
But no depth, logspeed and wind information although they are present at the output side of the multiplxer (see attached file) Try it with just the SIMRAD connected to the C-80. It may be possible that the Simrad is sending a format the C-80 can't use. That and have you asked Simrad? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Waaaaaay OT (snow ski equipment problem) | General | |||
| A question about NMEA, AIS and Raymarine | Electronics | |||
| Raymarine ST60 Multi does not convert from NMEA Input to Seatalk | Electronics | |||
| Using my own map with i.e Raymarine or other equipment | Electronics | |||
| nmea - Windows XP problem | Electronics | |||
Threaded Mode
