Home |
Search |
Today's Posts |
#12
posted to rec.boats.electronics
|
|||
|
|||
Nmea /dsc
"nollaigoc" wrote in message
ups.com... Hi, Sounds like you are not making correct connections from Garmin to VHF radio. This is a two wire connection, Garmin NMEA out and ground. What is needed is to have Garmin interface set to deliver NMEA out via its' cofiguration menu. Then all that is needed is two wires from Garmin to VHF : These two wires should be within a screened cable between the units. Twisted is also OK. For a short run, any cable will do. If correctly wired the position will appear on VHF as soon as Garmin finds its position. Good point. If you don't have a fix or run the garmin in simulator mode, the VHF will probably also say "no data". In simulator mode, a flag in the NMEA sentences says it's simulated data. Meindert |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
how to read AIS data from encapsulated NMEA VDO sentence | Electronics | |||
Objective of NMEA | Electronics | |||
Nmea and seatalk to TCP / IP | Electronics | |||
Getting nmea connections into my laptop | Cruising | |||
Cool! Bennett trim tab indicators now interface with NMEA 2000 standard | General |