Wouldn't two DIESELS be much cheaper and lots more reliable than outboard
gas guzzlers in a commercial operation???[/quote]

Yes, diesels would be prefereable. However this hull was specifically designed for twin outboards. It has a transom extension for mounting the outboards. The hull is also pretty shallow, so there's not much space for engines under the deck. As for costs, the outboards were MUCH cheaper to purchase than diesels would have been, especially since I got them used. These are relatively new direct injected, computer controlled 2-strokes and the boat is pretty light (about 5000 lbs dry), so I get great gas mileage; about 2 mpg crusing at 25 knots. What I'd really love would be a pair of 150 HP diesel OUTBOARDS, but I don't think there's any such thing. Having two engines covers me on reliability. I can still make over 25 knots on one motor. Full speed at WOT on both motors is almost 40 knots.

One of the earlier posts mentions RF noise concerns from the motors. Any other opinions on this? I could line the motor cowls with aluminum foil if this would help.

Also, with a 17.5' antenna, at what frequencies would I have best performance at? What kind of ranges could I expect? The only really important frequency for me is 2182 kHz (int'l distress). I need to be able to contact local Coast Guard stations (several of which will be less than 150 miles away at any given time) on this frequency in an emergency.

bradleyj wrote in
:

These are relatively new direct injected, computer controlled 2-strokes
and the boat is pretty light (about 5000 lbs dry), so I get great gas
mileage; about 2 mpg crusing at 25 knots. What I'd really love would be


Oh, God.....Please tell me they are NOT Ficht engines that you're going to
sea with...Please....

bradleyj wrote in
:

One of the earlier posts mentions RF noise concerns from the motors. Any
other opinions on this? I could line the motor cowls with aluminum foil
if this would help.



If these are Ficht engines, I doubt you'll ever hear anything, foil or not,
on an HF radio. Hell, they wipe out a 5KW AM on 1250 in the harbor! The
computers and that stupid injection system blowtorch eating the heads off
the spark plugs..all those make incredible RF noise. You'd never be able
to shield it all as it sneaks out every wire going to the console, its own
antenna.

Please tell me those are not Ficht engines....How awful.

On Wed, 1 Feb 2006 14:08:56 +0000, bradleyj
wrote:

The only really
important frequency for me is 2182 kHz

Actually not since it is not much used anymore, lots of reasons.

4125 khz is probably your best bet under most conditions. Here is
more information:

http://www.navcen.uscg.gov/marcomms/...ewFreq2005.htm

Regarding engine noise, time will tell. At idle with a good radio and
noise supression circuitry, it may not be that bad. You can get noise
supressed plugs and wires if need be. Alternators can be an issue
also.

Yes everyone, they are Ficht engines. After doing a tremendous amount of research on these motors prior to buying them (including conversations with mechanics who have worked on them), I came to the conclusion that the modifications that OMC made to address the design defects originally present in these motors did the trick. As part of these mods, these particular motors were refitted with redesigned cylinder heads, fuel system modifications and new ECU software. These motors were installed on a NMFS vessel in Alaska for four years. When they repowered their fleet in 2003, I purchased them with about 325 hours on them and put another 100 trouble-free hours on them myself last year. I do the vast majority of my fishing within 20 miles of shore and when I do go offshore, I never go out more than about 100 miles. The chances of both engines failing simultaneously is pretty remote.

If any one of you badmouthing the Fichts has ever owned one and had problems with it I'd like to hear your story. I'll be a bit surprised if anyone can offer anything more than "I know someone who knows someone....". The original design of these motors was definitely deficient and their fix came too late. It contributed substantially to the ruination of OMC, more through the loss of reputation than the quality of their products.

I was surprised to find your post in this NG, but what the heck. :=)

I have owned and operated a 1998 FICHT since buying it new in 1999. I've
had no parts failures and the only work ever done on the OB was spark plug
replacement and ECU updates.

The engine is quiet, efficient, and clean burning. There is no soot on my
prop hub and the thing never smokes.

There is an interesting thread by FICHT owners on either thehulltruth.com or
boatfix.com forums, sorry I don't remember which.

Butch
"bradleyj" wrote in message
...

Yes everyone, they are Ficht engines. After doing a tremendous amount
of research on these motors prior to buying them (including
conversations with mechanics who have worked on them), I came to the
conclusion that the modifications that OMC made to address the design
defects originally present in these motors did the trick. As part of
these mods, these particular motors were refitted with redesigned
cylinder heads, fuel system modifications and new ECU software. These
motors were installed on a NMFS vessel in Alaska for four years. When
they repowered their fleet in 2003, I purchased them with about 325
hours on them and put another 100 trouble-free hours on them myself
last year. I do the vast majority of my fishing within 20 miles of
shore and when I do go offshore, I never go out more than about 100
miles. The chances of both engines failing simultaneously is pretty
remote.

If any one of you badmouthing the Fichts has ever owned one and had
problems with it I'd like to hear your story. I'll be a bit surprised
if anyone can offer anything more than "I know someone who knows
someone....". The original design of these motors was definitely
deficient and their fix came too late. It contributed substantially to
the ruination of OMC, more through the loss of reputation than the
quality of their products.


--
bradleyj