Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
"Larry" wrote in message
... "Glenn Ashmore" wrote in news:RaYCe.172558$sy6.31115@lakeread04: Can't speak to the transflective part but I have tried all three technologies,IR,capacitive and resistive on my CNC router. I can pretty well confirm that none have a place in an open cockpit. If a drop of water hits an IR screen it will pop up a menu and ignore your finger. Same thing for a capacitive except that a thin coat of dust will confuse it too. The resistive is better than the others but will pop up a menu if you cough at it so no telling what it will do in a 20 knot wind. YO! MEINDERT! YOU READIN' DIS BO?!! Yes, and I certainly haven't experienced what Glenn is describing with the screens I've worked with. they were resistive and you have to apply more pressure than a 20 knot wind does...... But I'll ask the yard who built and maintains this yacht tomorrow, to see if they have any complaints from the owner. Meindert |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Touchscreens | Electronics |